This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Enter a search term and click .

Connect the camera to the computer using the supplied USB cable and copy pictures as described below.

  1. Start the computer.

  2. Turn the camera off.

  3. Use the supplied USB cable to connect the camera and computer.

    Be sure the connectors are in the correct orientation and fully inserted. Connect the camera directly to the computer; do not use a USB hub or keyboard.

  4. Turn the camera on.

  5. Copy pictures to the computer using MyFinePix Studio or applications provided with your operating system.


Use MyFinePIx Studio (available for Windows only) to copy pictures to a computer, where they can be viewed, organized, and printed. To view RAW images on the computer, use RAW FILE CONVERTER.

If a memory card containing a large number of images is inserted, there may be a delay before the software starts and you may be unable to import or save images. Use a memory card reader to transfer pictures.

Make sure that the computer does not display a message stating that copying is in progress and that the indicator lamp is out before turning the camera off or disconnecting the USB cable (if the number of images copied is very large, the indicator lamp may remain lit after the message has cleared from the computer display). Failure to observe this precaution could result in loss of data or damage to the memory card.

Disconnect the camera before inserting or removing memory cards.

In some cases, it may not be possible to access pictures saved to a network server using the supplied software in the same way as on a standalone computer.

The user bears all applicable fees charged by the phone company or Internet service provider when using services that require an Internet connection.