The following warnings are displayed in the LCD monitor:
|Low battery. Charge the battery or insert a fully-charged spare battery.
|Battery exhausted. Charge the battery or insert a fully-charged spare battery.
(displayed in red with red focus frame)
The camera can not focus. Use focus lock to focus on another subject at the same distance, then recompose the picture.
|Aperture or shutter speed displayed in red
|The subject is too bright or too dark and the picture will be over- or under-exposed. Use the flash for additional lighting when taking photographs of poorly-lit subjects.
|Camera malfunction. Turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer.
|Turn the camera off, remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera on. If the problem persists, contact a FUJIFILM dealer.
|The memory card is incorrectly formatted. Use the camera to format the card.
|The memory card is locked. Unlock the card.
|The memory card is full and pictures can not be recorded. Delete pictures or insert a memory card with more free space.
|The shutter can only be released when a memory card is inserted. Insert a memory card.
|The camera has run out of frame numbers (current frame number is 999–9999). Format the memory card and select RENEW for SAVE DATA SETTING > FRAME NO.. Take a picture to reset frame numbering to 100–0001, then select CONTINUOUS for FRAME NO..
|An attempt was made to delete or rotate to a protected picture. Remove protection and try again.
|The picture is damaged or was not created with the camera.
|Red-eye removal can not be applied to the selected picture.
|Red-eye removal can not be applied to movies.
|An attempt was made to rotate a picture that can not be rotated.
|Movies can not be rotated.
|The DPOF print order on the current memory card contains more than 999 images. Copy the pictures to a computer and create a new print order.
|The picture can not be printed using DPOF.
|Movies can not be printed using DPOF.
|Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.
|Turn the camera off and wait for it to cool. Display quality and burst rate will drop, and mottling may increase in pictures taken when this warning is displayed.