Pictures can be viewed in the viewfinder or LCD monitor.
To view pictures full frame, press a.
Additional pictures can be viewed by pressing the focus stick (focus lever) left or right or rotating the front command dial. Press the focus stick or rotate the dial right to view pictures in the order recorded, left to view pictures in reverse order. Keep the stick pressed to scroll rapidly to the desired frame.
Pictures taken using other cameras are marked with a m (“gift image”) icon to warn that they may not display correctly and that playback zoom may not be available.
Two Memory Cards
If two memory cards are inserted, you can press and hold the a button to choose a card for playback. You can also select a card using the C[PLAY BACK MENU] > [SWITCH SLOT] option.
Camera shooting and playback displays can be output to HDMI devices.
Connecting to HDMI Devices
Connect the camera to TVs or other HDMI devices using a third-party HDMI cable.
Turn the camera off.
Connect the cable as shown below.
Configure the device for HDMI input as described in the documentation supplied with the device.
Turn the camera on. The contents of the camera display will be shown on the HDMI device. The camera display turns off in playback mode (aPlayback).
Making sure the connectors are fully inserted.
Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
Display live view or movie footage on a TV or save it to an external recorder that supports HDMI input.
To start playback, press the camera a button. The camera monitor turns off and pictures and movies are output to the HDMI device. Note that the camera volume controls have no effect on sounds played on the TV; use the television volume controls to adjust the volume.
Some televisions may briefly display a black screen when movie playback begins.