Adjust power management settings.
To access power management settings, press [MENU/OK], select the D ([SET UP]) tab, and choose [POWER MANAGEMENT].
[AUTO POWER OFF]
Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if [OFF] is selected, the camera must be turned off manually.
|[5 MIN]||[2 MIN]||[1 MIN]||[30 SEC]||[15 SEC]||[OFF]|
Select [BOOST] to improve focus and viewfinder display performance.
|[BOOST]||Boost camera focus and viewfinder display performance. The battery drains faster than when is [NORMAL] selected.|
|[NORMAL]||Choose for standard focus and viewfinder display performance and battery endurance.|
|[ECONOMY]||Limit autofocus and viewfinder performance. This option offers better battery endurance than does [NORMAL].|
[EVF/LCD BOOST SETTING]
Adjust the behavior of the EVF and LCD monitor when [BOOST] is selected for [PERFORMANCE].
|[EVF/LCD LOW LIGHT PRIORITY]||Display brightness is adjusted to make subjects in shadows easier to see. Motion blur may cause ghosting.|
|[EVF/LCD RESOLUTION PRIORITY]||Display resolution is increased to make details easier to see.|
|[EVF FRAME RATE PRIORITY (120P)]||The refresh rate for the EVF is increased, smoothing motion.|
|[EVF FRAME RATE PRIORITY (240P EQUIV.)]||The refresh rate for the EVF is increased beyond [EVF FRAME RATE PRIORITY (120P)], smoothing motion still further. The EVF may darken.|
[AUTO POWER OFF TEMP.]
If its temperature rises beyond a certain point, the camera will first display a message and then, if the temperature rise continues, automatically end shooting and power down. Choose the temperature at which the camera turns off automatically.
|[STANDARD]||The camera turns off automatically when its temperature reaches the [STANDARD] value.|
|[HIGH]||Shooting can continue at temperatures higher than the [STANDARD] value, extending the time available to record movies and the like. ecause remaining in contact with the camera at these high temperatures could result in low-temperature burns, this option should only be used after mounting the camera on a tripod or taking other steps to avoid prolonged contact with the camera.|