Enter a search term and click .

Adjust playback settings.


The playback menu is displayed when you press [MENU/OK] in playback mode.

[SWITCH SLOT]

Choose the card from which images will be played back.

If two memory cards are inserted, you can press and hold the a button to choose a card for playback.

[RAW CONVERSION]

RAW pictures store information on camera settings separately from the data captured by the camera image sensor. Using C[PLAY BACK MENU] > [RAW CONVERSION], you can create JPEG copies of RAW pictures using different options for the settings listed on “Setting”. The original image data are unaffected, allowing a single RAW image to be processed in a multitude of different ways.

  1. With a RAW picture displayed, press [MENU/OK] to display the playback menu.

  2. Press the selector up or down to highlight C[PLAY BACK MENU] > [RAW CONVERSION] and press [MENU/OK] to display settings.

    These options can also be displayed by pressing the [Q] button during playback.

  3. Press the selector up or down to highlight a setting and press the selector right to display options. Press the selector up or down to highlight the desired option and press [MENU/OK] to select and return to the settings list. Repeat this step to adjust additional settings.

  4. Press the [Q] button to preview the JPEG copy and press [MENU/OK] to save.

The settings that can be adjusted when converting pictures from RAW to JPEG are:

Setting Description
[REFLECT SHOOTING COND.] Create a JPEG copy using the settings in effect at the time the photo was taken.
[FILE TYPE] Choose a file format.
[IMAGE SIZE] Choose an image size.
[IMAGE QUALITY] Adjust image quality.
[PUSH/PULL PROCESSING] Adjust exposure.
[DYNAMIC RANGE] Enhance details in highlights for natural contrast.
[FILM SIMULATION] Simulate the effects of different types of film.
[GRAIN EFFECT] Add a film grain effect.
[COLOR CHROME EFFECT] Deepen colors in shadows.
[SMOOTH SKIN EFFECT] Smooth complexions.
[WHITE BALANCE] Adjust white balance.
[WB SHIFT] Fine-tune white balance.
[HIGHLIGHT TONE] Adjust highlights.
[SHADOW TONE] Adjust shadows.
[COLOR] Adjust color density.
[SHARPNESS] Sharpen or soften outlines.
[NOISE REDUCTION] Process the copy to reduce mottling.
[LENS MODULATION OPTIMIZER] Improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens.
[COLOR SPACE] Choose the color space used for color reproduction.

[ERASE]

Delete individual pictures, multiple selected pictures, or all pictures.

Deleted pictures can not be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding.

Option Description
[FRAME] Delete pictures one at a time.
[SELECTED FRAMES] Delete multiple selected pictures.
[ALL FRAMES] Delete all unprotected pictures.

[FRAME]

  1. Select [FRAME] for [ERASE] in the playback menu.

  2. Press the selector left or right to scroll through pictures and press [MENU/OK] to delete (a confirmation dialog is not displayed). Repeat to delete additional pictures.

[SELECTED FRAMES]

  1. Select [SELECTED FRAMES] for [ERASE] in the playback menu.

  2. Highlight pictures and press [MENU/OK] to select or deselect (pictures in photobooks or printer orders are shown by S). Selected pictures are indicated by check marks (R).

  3. When the operation is complete, press [DISP/BACK] to display a confirmation dialog.

  4. Highlight [OK] and press [MENU/OK] to delete the selected pictures.

[ALL FRAMES]

  1. Select [ALL FRAMES] for [ERASE] in the playback menu.

  2. A confirmation dialog will be displayed; highlight [OK] and press [MENU/OK] to delete all unprotected pictures.

Pressing [DISP/BACK] cancels deletion; note that any pictures deleted before the button was pressed can not be recovered.

If a message appears stating that the selected images are part of a DPOF print order, press [MENU/OK] to delete the pictures.

[SIMULTANEOUS DELETE(RAW SLOT1/JPG SLOT2)]

Taking photos with [RAW]/[JPEG] selected for D[SAVE DATA SET-UP] > [CARD SLOT SETTING (STILL IMAGE)] creates two copies. Choose whether deleting the RAW image will also delete the JPEG copy.

Option Description
[ON] Deleting the RAW image from the card in Slot 1 also deletes the JPEG copy from the card in Slot 2.
[OFF] Deleting the RAW image from the card in Slot 1 does not delete the JPEG copy from the card in Slot 2.

[CROP]

Create a cropped copy of the current picture.

  1. Display the desired picture.

  2. Select [CROP] in the playback menu.

  3. Use the rear command dial to zoom in and out and press the selector up, down, left, or right to scroll the picture until the desired portion is displayed.

  4. Press [MENU/OK] to display a confirmation dialog.

  5. Press [MENU/OK] again to save the cropped copy to a separate file.

Larger crops produce larger copies; all copies have an aspect ratio of 3∶2. If the size of the final copy will be a, [YES] will be displayed in yellow.

[RESIZE]

Create a small copy of the current picture.

  1. Display the desired picture.

  2. Select [RESIZE] in the playback menu.

  3. Highlight a size and press [MENU/OK] to display a confirmation dialog.

  4. Press [MENU/OK] again to save the resized copy to a separate file.

The sizes available vary with the size of the original image.

[PROTECT]

Protect pictures from accidental deletion. Highlight one of the following options and press [MENU/OK].

  • [FRAME]: Protect selected pictures. Press the selector left or right to view pictures and press [MENU/OK] to select or deselect. Press [DISP/BACK] when the operation is complete.
  • [SET ALL]: Protect all pictures.
  • [RESET ALL]: Remove protection from all pictures.

Protected pictures will be deleted when the memory card is formatted.

[IMAGE ROTATE]

Rotate pictures.

  1. Display the desired picture.

  2. Select [IMAGE ROTATE] in the playback menu.

  3. Press the selector down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise.

  4. Press [MENU/OK]. The picture will automatically be displayed in the selected orientation whenever it is played back on the camera.

Protected pictures can not be rotated. Remove protection before rotating pictures.

The camera may not be able to rotate pictures created with other devices. Pictures rotated on the camera will not be rotated when viewed on a computer or on other cameras.

Pictures taken with D[SCREEN SETTING] > [AUTOROTATE PB] are automatically displayed in the correct orientation during playback.

[RED EYE REMOVAL]

Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create a copy with reduced red-eye.

  1. Display the desired picture.

  2. Select [RED EYE REMOVAL] in the playback menu.

  3. Press [MENU/OK].

Results vary depending on the scene and the camera’s success in detecting faces. Red eye can not be removed from pictures that have already been processed using red-eye removal, which are indicated by a e icon during playback.

The amount of time needed to process the image varies with the number of faces detected.

Red eye removal can not be performed on RAW images.

[VOICE MEMO SETTING]

Add a voice memo to the current photograph.

  1. Select [ON] for [VOICE MEMO SETTING] in the playback menu.

  2. Display a photo to which you wish to add a voice memo.

  3. Press and hold the center of the front command dial to record the memo. Recording ends after 30 s or when you release the dial.

The new memo will be recorded over any existing memos. Deleting the picture also deletes the memo.

Voice memos can not be added to movies or protected pictures.

Playing Voice Memos

Pictures with voice memos are indicated by q icons during playback. To play a memo, select the picture and press the center of the front command dial; a progress bar will be displayed while the memo plays back. Volume can be adjusted by pressing [MENU/OK] to pause playback and then pressing the selector up or down to adjust the volume. Press [MENU/OK] again to resume playback. Volume can also be adjusted using D[SOUND SETTING] > [PLAYBACK VOLUME].

[RATING]

Rate pictures using stars.

  1. Select [RATING] in the playback menu.

  2. Rotate the front command dial to choose a picture and the rear command dial to choose a rating of from 0 to 5 stars (“ I ”).

The selector can be used in place of the front command dial to choose a picture.

The rating dialog can also be displayed by pressing the [Fn5] button in single-frame, nine-frame, or hundred-frame playback.

Use touch controls to zoom in or out.

[COPY]

Copy pictures between the cards in the first and second slots.

  1. Select [COPY] in the playback menu.

  2. Highlight one of the following options and press the selector right:

    • [SLOT1] y[SLOT2]: Copy pictures from the card in the first slot to the card in the second slot.
    • [SLOT2] y [SLOT1]: Copy pictures from the card in the second slot to the card in the first slot.
  3. Highlight one of the following options and press [MENU/OK]:

    • [FRAME]: Copy selected pictures. Press the selector left or right to view pictures and press [MENU/OK] to copy the current picture.
    • [ALL FRAMES]: Copy all pictures.

Copying ends when the destination is full.

[WIRELESS COMMUNICATION]

Connect to smartphones running the “[FUJIFILM Camera Remote]” app. The smartphone can be used to browse the images on the camera, download selected images, control the camera remotely, or upload location data to the camera.

For downloads and other information, visit:

aApp for Smart Phones, Tablets, and Computers

[PHOTOBOOK ASSIST]

Create books from your favorite photos.

Creating a Photobook

  1. Select [NEW BOOK] for C[PLAY BACK MENU] > [PHOTOBOOK ASSIST].

  2. Scroll through the images and press the selector up to select or deselect. Press [MENU/OK] to exit when the book is complete.

    Neither photographs a or smaller nor movies can be selected for photobooks.

    The first picture selected becomes the cover image. Press the selector down to select the current image for the cover instead.

  3. Highlight [COMPLETE PHOTOBOOK] and press [MENU/OK] (to select all photos for the book, choose [SELECT ALL]). The new book will be added to the list in the photobook assist menu.

Books can contain up to 300 pictures. Books that contain no photos are automatically deleted.

Photobooks

Photobooks can be copied to a computer using [MyFinePix Studio] software.

Viewing Photobooks

Highlight a book in the photobook assist menu and press [MENU/OK] to display the book, then press the selector left or right to scroll through the pictures.

Editing and Deleting Photobooks

Display the photobook and press [MENU/OK]. The following options will be displayed; select the desired option and follow the on-screen instructions.

  • [EDIT]: Edit the book as described in “Creating a Photobook”.
  • [ERASE]: Delete the book.

Create a digital “print order” for DPOF-compatible printers.

  1. Select C[PLAY BACK MENU] > [PRINT ORDER (DPOF)].

  2. Select [WITH DATE]s to print the date of recording on pictures, [WITHOUT DATE] to print pictures without dates, or [RESET ALL] to remove all pictures from the print order before proceeding.

  3. Display a picture you wish to include in or remove from the print order.

  4. Press the selector up or down to choose the number of copies (up to 99). To remove a picture from the order, press the selector down until the number of copies is 0.

    Total number of prints

    Number of copies

  5. Repeat steps 3–4 to complete the print order.

  6. The total number of prints is displayed in the monitor. Press [MENU/OK] to exit.

The pictures in the current print order are indicated by a u icon during playback.

Print orders can contain a maximum of 999 pictures.

If a memory card is inserted containing a print order created by another camera, a message will be displayed. Pressing [MENU/OK] cancels the print order; a new print order must be created as described above.

[instax PRINTER PRINT]

To print pictures to optional [FUJIFILM instax SHARE] printers, first select D[CONNECTION SETTING] > [instax PRINTER CONNECTION SETTING] and enter the [instax SHARE] printer name (SSID) and password, then follow the steps below.

  1. Turn the printer on.

  2. Select C[PLAY BACK MENU] > [instax PRINTER PRINT]. The camera will connect to the printer.

    To print a frame from a burst sequence, display the frame before selecting [instax PRINTER PRINT].

  3. Use the selector to display the picture you want to print, then press [MENU/OK]. The picture will be sent to the printer and printing will start.

    Pictures taken with other cameras can not be printed.

    The area printed is smaller than the area visible in the LCD monitor.

[DISP ASPECT]

Choose how High Definition (HD) devices display pictures with an aspect ratio of 4∶3 (this option takes effect only when an HDMI cable is connected). Select 16∶9 to display the image so that it fills the screen with its top and bottom cropped out, 4∶3 to display the entire image with black bands at either side.

  Option
[16:9] [3:2]
Display

Select [16∶9] when viewing pictures with an aspect ratio of 16∶9.