DThe Setup Menus ([USER SETTING])
Adjust basic camera settings.
To access basic camera settings, press [MENU]/[OK], select the D ([SET UP]) tab, and choose [USER SETTING].
- [TIME DIFFERENCE]
- [MY MENU SETTING]
- [SENSOR CLEANING]
- [BATTERY AGE]
To format a memory card:
Select D[USER SETTING] > [FORMAT] in the D ([SET UP]) tab.
A confirmation dialog will be displayed. To format the memory card, highlight [OK] and press [MENU]/[OK].
To exit without formatting the memory card, select [CANCEL] or press [DISP/BACK].
All data—including protected pictures—will be deleted from the memory card. Be sure important files have been copied to a computer or other storage device.
Do not remove the battery tray during formatting.
The format menu can also be displayed by pressing the center of the rear command dial while pressing and holding the b button.
To set the camera clock:
Select D[USER SETTING] > [DATE/TIME] in the D ([SET UP]) tab.
Press the focus stick (focus lever) left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date format and press the focus stick up or down.
Press [MENU]/[OK] to set the clock.
Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the difference between your local and home time zone:
Highlight g[LOCAL] and press [MENU]/[OK].
Use the focus stick (focus lever) to choose the time difference between local time and your home time zone. Press [MENU]/[OK] when settings are complete.
To set the camera clock to local time, highlight g[LOCAL] and press [MENU]/[OK]. To set the clock to the time in your home time zone, select h[HOME].
If g[LOCAL] is selected, g will be displayed in yellow for about three seconds when the camera is turned on.
Choose a language.
[MY MENU SETTING]
Edit the items listed in the E ([MY MENU]) tab, a personalized custom menu of frequently-used options.
Highlight D[USER SETTING] > [MY MENU SETTING] in the D ([SET UP]) tab and press [MENU]/[OK].
To reorder items, select [RANK ITEMS]. To delete items, select [REMOVE ITEMS].
Press the focus stick (focus lever) up or down to highlight [ADD ITEMS] and press [MENU]/[OK]. Options that can be added to “my menu” are highlighted in blue.
Items currently in “my menu” are indicated by check marks.
Choose a position for the item and press [MENU]/[OK]. The item will be added to “my menu”.
Press [MENU]/[OK] to return to the edit display.
Repeat Steps 3 and 4 until all the desired items have been added.
“My menu” can contain up to 16 items.
Remove dust from the camera image sensor.
|[OK]||Clean the sensor immediately.|
|[WHEN SWITCHED ON]||Sensor cleaning will be performed when the camera is turned on.|
|[WHEN SWITCHED OFF]||Sensor cleaning will be performed when the camera turns off (sensor cleaning is not however performed if the camera turns off in playback mode).|
Dust that cannot be removed using sensor cleaning can be removed using a blower (aCleaning the Image Sensor).
Check battery age. Age is expressed as a number between 0 and 4. The higher the number, the older the battery.
The older the battery, the faster it loses its charge. We recommend that batteries be replaced as they wear out.
Reset shooting or setup menu options to default values.
Highlight the desired option and press [MENU]/[OK].
Option Description [SHOOTING MENU RESET] Reset all shooting menu settings other than custom white balance and custom settings banks created using [EDIT/SAVE CUSTOM SETTING] to default values. [SET-UP RESET] Reset all setup menu settings other than [DATE/TIME], [TIME DIFFERENCE], [COPYRIGHT INFO], and connection-related [CONNECTION SETTING] options to default values.
A confirmation dialog will be displayed; highlight [OK] and press [MENU]/[OK].
Display product certificates.