Enter a search term and click .

Adjust power management settings.

To access power management settings, press [MENU]/[OK], select the D ([SET UP]) tab, and choose [POWER MANAGEMENT].


Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if [OFF] is selected, the camera must be turned off manually.

[5 MIN] [2 MIN] [1 MIN] [30 SEC] [15 SEC] [OFF]


Select [BOOST] to improve focus and viewfinder display performance.

Option Description

Boost camera focus and/or viewfinder display performance. The battery drains faster than when is [NORMAL] selected.

You can choose to assign priority to:

[AF PRIORITY]: Focus speed.

[EVF RESOLUTION PRIORITY]: Viewfinder resolution.

[EVF FRAME RATE PRIORITY]: Viewfinder frame rate for smoother motion.

Regardless of the option selected, the camera functions in [AF PRIORITY] mode while the monitor is on.

[NORMAL] Choose for standard focus and viewfinder display performance and battery endurance.


Choose the delay before the camera enters shooting standby mode.

Option Description
[5 MIN] The camera will suspend all functions and enter powering-saving (standby) mode if no operations are performed for the selected period.
[2 MIN]
[1 MIN]
[30 SEC]
[15 SEC]
[OFF] Shooting standby mode disabled.


If [ON] is selected, the display frame rate will drop to save power if no operations are performed for a short period, but the normal frame rate can be restored by operating camera controls.

[ON] [OFF]