This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Enter a search term and click .

After charging the battery, insert the battery in the camera as described below.

  1. Open the battery-chamber cover.

    Slide the battery-chamber latch as shown and open the battery-chamber cover.

    Do not open the battery-chamber cover when the camera is on. Failure to observe this precaution could damage image files or memory cards.

    Do not use excessive force when handling the battery-chamber cover.

  2. Insert the battery.

    Using the battery to keep the battery latch pressed to one side, insert the battery contacts first in the direction shown by the arrow. Confirm that the battery is securely latched.

    Arrow

    Battery latch

    Insert the battery in the orientation shown. Do not use force or attempt to insert the battery upside down or backwards. The battery will slide in easily in the correct orientation.

  3. Insert the memory card

    Holding the memory card in the orientation shown, slide it in until it clicks into place at the back of the slot.

    Be sure card is in the correct orientation; do not insert at an angle or use force.

  4. Close the battery-chamber cover.

Removing the Battery

Before removing the battery, turn the camera off and open the battery-chamber cover.

To remove the battery, press the battery latch to the side, and slide the battery out of the camera as shown.

The battery may become hot when used in high-temperature environments. Observe caution when removing the battery.

Removing Memory Cards

Before removing memory cards, turn the camera off and open the battery-chamber cover.

Press and release the card to eject it part way (to prevent the card falling from the slot, press the center of the card and re-lease it slowly, without removing your finger from the card). The card can then be removed by hand.

Compatible Memory Cards

  • FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the camera. A complete list of approved memory cards is available at http://www.fujifilm.com/support/digital_cameras/compatibility/. Operation is not guaranteed with other cards. The camera can not be used with xD-Picture Cards or MultiMediaCard (MMC) devices.
  • Do not turn the camera off or remove the memory card while the memory card is being formatted or data are being recorded to or deleted from the card. Failure to observe this precaution could damage the card.
  • Format memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device.
  • Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card, seek medical assistance immediately.
  • miniSD or microSD adapters that are larger or smaller than the standard dimensions of an SD/SDHC/SDXC card may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do not forcibly remove the card.
  • Do not affix labels to memory cards. Peeling labels can cause camera malfunction.
  • Movie recording may be interrupted with some types of SD/SDHC/SDXC memory card. Use a CLASS10 card or better for movies and burst photography.
  • Formatting a memory card in the camera creates a folder in which pictures are stored. Do not rename or delete this folder or use a computer or other device to edit, delete, or rename image files. Always use the camera to delete pictures; before editing or renaming files, copy them to a computer and edit or rename the copies, not the originals. Renaming the files on the camera can cause problems during playback.