Enter a search term and click .

The following optional accessories are available from Fujifilm. For the latest information on the accessories available in your region, check with your local Fujifilm representative or visit “Accessories”.

Rechargeable Li-ion batteries
NP‑W126S: Additional high-capacity NP‑W126S rechargeable batteries can be purchased as required.
Battery chargers
BC‑W126S: Replacement battery chargers can be purchased as required. At +20 °C/+68 °F, the BC-W126S charges an NP‑W126S in about 150 minutes.
AC power adapters
AC-9V (requires CP-W126 DC coupler): Use this 100–240 V, 50/60 Hz AC power adapter for extended shooting and playback or when copying pictures to a computer.
DC couplers
CP‑W126: For extended shooting or playback or when using the camera with a computer, use the CP-W126 to connect the camera to the AC-9V power adapter.
Remote releases
RR‑100: Use to reduce camera shake or keep the shutter open during a time exposure. The RR-100 has a connector with a diameter of 2.5 mm; a third-party ⌀2.5 mm to 3.5 mm adapter is required for connection to the camera.
Stereo microphones
MIC‑ST1: An external microphone for movie recording.
FUJINON lenses
XF‑/XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
Macro extension tubes
MCEX‑11/16: Attach between the camera and the lens to shoot at high reproduction ratios.
Teleconverters
XF1.4X TC WR: Increases the focal length of the compatible lenses by about 1.4×.
XF2X TC WR: Increases the focal length of the compatible lenses by about 2.0×.
Mount adapters
FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses.
Body caps
BCP‑001: Cover the camera lens mount when no lens is attached.
Shoe-mounted flash units
EF‑X500: This clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.) and is powered by four AA batteries or an optional EF‑BP1 battery pack.
EF-BP1: A battery pack for shoe-mounted flash units. Takes up to 8 AA batteries.
EF‑42: This clip-on flash unit has a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL flash control.
EF‑X20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and supports manual and TTL flash control.
EF‑20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and supports TTL flash control (manual flash control is not supported).
Grip belts
GB‑001: Offers an enhanced grip.
instax SHARE printers
SP‑1/SP-2/SP-3: Connect via wireless LAN to print pictures on instax film.