Enter a search term and click .

Make changes to display settings.


To access display settings, press MENU/OK, select the (SET UP) tab, and choose SCREEN SET-UP.

EVF BRIGHTNESS

Adjust the brightness of the display in the electronic viewfinder. Select MANUAL to choose from 13 options from +5 (bright) to −7 (dark), or select AUTO for automatic brightness adjustment.

Options
MANUAL AUTO

EVF COLOR

Adjust the hue of the display in the electronic viewfinder. Choose from 11 options between +5 and −5.

Options
+5 +4 +3 +2 +1 0 -1 -2 -3 -4 -5

EVF COLOR ADJUSTMENT

Adjust the color of the display in the electronic viewfinder.

  1. Adjust colors using the selector.

  2. Press MENU/OK.

LCD BRIGHTNESS

Adjust monitor brightness. Choose from 11 options between +5 and −5.

Options
+5 +4 +3 +2 +1 0 -1 -2 -3 -4 -5

LCD COLOR

Adjust monitor hue. Choose from 11 options between +5 and −5.

Options
+5 +4 +3 +2 +1 0 -1 -2 -3 -4 -5

LCD COLOR ADJUSTMENT

Adjust the color of the display in the LCD monitor.

  1. Adjust colors using the selector.

  2. Press MENU/OK.

IMAGE DISP.

Choose how long images are displayed after shooting. Colors may differ slightly from those in the final image and “noise” mottling may be visible at high sensitivities.

Option Description
CONTINUOUS Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the rear command dial; press again to cancel zoom.
1.5 SEC Pictures are displayed for the selected time or until the shutter button is pressed halfway.
0.5 SEC
OFF Pictures are not displayed after shooting.

AUTOROTATE DISPLAYS

Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation.

Options
ON OFF

PREVIEW EXP./WB IN MANUAL MODE

Select PREVIEW EXP./WB to enable exposure and white balance preview in manual exposure mode, or choose PREVIEW WB to preview only white balance (PREVIEW WB is recommended in situations in which exposure and white balance are likely to change during shooting, as may be the case when you use a flash with an incandescent monitoring lamp). Select OFF when using a flash or on other occasions on which exposure may change when the picture is taken.

Options
PREVIEW EXP./WB PREVIEW WB OFF

NATURAL LIVE VIEW

Choose OFF to preview the effects of film simulation, white balance, and other settings in the monitor, ON to make shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible.

Options
ON OFF

If ON is selected, the effects of camera settings will not be visible in the monitor and colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of advanced filters and of monochrome and sepia settings.

FRAMING GUIDELINE

Choose a framing grid for shooting mode.

  Option
GRID 9 GRID 24 HD FRAMING
Display
For “rule of thirds” composition. A six-by-four grid. Frame HD pictures in the crop shown by the lines at the top and bottom of the display.

Framing guides are not shown at default settings but can be displayed using SCREEN SET-UP > DISP. CUSTOM SETTING (DISP. CUSTOM SETTING). HD framing can be customized using FUJIFILM Tether Shooting Plug-in PRO or Hyper-Utility Software HS-V5.

AUTOROTATE PB

Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback.

Options
ON OFF

FOCUS SCALE UNITS

Choose the units used for the focus distance indicator.

Options
METERS FEET

APERTURE UNIT FOR CINEMA LENS

Choose whether the camera displays aperture as a T-number (used for movie camera lenses) or an f/-number (used for still camera lenses) when an optional FUJINON MKX-series lens is attached. For information on using cinema lenses, see the documentation provided with the lens.

Option Description
T NUMBER A measure of lens aperture commonly used by cinematographers. Lens transmittance is taken into account to better calculate exposure.
F NUMBER A measure of lens aperture commonly used by photographers. Lens transmittance is assumed to be 100%, meaning that the same aperture may produce different exposures depending on the lens.

DUAL DISPLAY SETTING

Choose the content of the two windows in the dual display.

Option Description
R:FOCUS L:FRAME The right (small) window shows a close-up of the focus area, while the left (large) window shows the entire frame.
R:FRAME L:FOCUS The right (small) window shows the entire frame, while the left (large) window shows a close-up of the focus area.

DISP. CUSTOM SETTING

Choose the items shown in the standard indicator display.

  1. In shooting mode, use the DISP/BACK button to display standard indicators.

  2. Press MENU/OK and select SCREEN SET-UP > DISP. CUSTOM SETTING in the (SET UP) tab.

  3. Highlight items and press MENU/OK to select or deselect.

    Item Default
    FRAMING GUIDELINE
    ELECTRONIC LEVEL
    FOCUS FRAME
    AF DISTANCE INDICATOR
    MF DISTANCE INDICATOR
    HISTOGRAM
    LIVE VIEW HIGHLIGHT ALERT
    SHOOTING MODE
    APERTURE/S-SPEED/ISO
    INFORMATION BACKGROUND
    Expo. Comp. (Digit)
    Expo. Comp. (Scale)
    FOCUS MODE
    PHOTOMETRY
    SHUTTER TYPE
    FLASH
    CONTINUOUS MODE
    DUAL IS MODE
    TOUCH SCREEN MODE
    WHITE BALANCE
    FILM SIMULATION
    DYNAMIC RANGE
    BOOST MODE
    FRAMES REMAINING
    IMAGE SIZE/QUALITY
    MOVIE MODE & REC. TIME
    IMAGE TRANSFER ORDER
    MIC LEVEL
    BATTERY LEVEL
    FRAMING OUTLINE
  4. Press DISP/BACK to save changes.

  5. Press DISP/BACK as needed to exit the menus and return to the shooting display.

LARGE INDICATORS MODE(EVF)

Select ON to display large indicators in the electronic viewfinder. The indicators displayed can be selected using SCREEN SETTING > LARGE INDICATORS DISP. SETTING.

OFF ON

Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(EVF), including:

  • Focus indicator
  • Focus mode
  • Distance indicator
  • Recording level
  • IS mode

If LARGE INDICATORS MODE is assigned to a function button, the button can be used to toggle LARGE INDICATORS MODE on (ON) and off (OFF) (FUNCTION (Fn) SETTINGAssigning Roles to the Function Buttons).

LARGE INDICATORS MODE(LCD)

Select ON to display large indicators in the LCD monitor. The indicators displayed can be selected using SCREEN SETTING > LARGE INDICATORS DISP. SETTING.

OFF ON

Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(LCD), including:

  • Focus indicator
  • Focus mode
  • Distance indicator
  • Recording level
  • IS mode

If LARGE INDICATORS MODE is assigned to a function button, the button can be used to toggle LARGE INDICATORS MODE on (ON) and off (OFF) (FUNCTION (Fn) SETTINGAssigning Roles to the Function Buttons).

LARGE INDICATORS DISP. SETTING

Choose the indicators displayed when ON is selected for SCREEN SETTING > LARGE INDICATORS MODE(EVF) or LARGE INDICATORS MODE(LCD).

Option Description

Expo. DISP.

Choose the items listed at the bottom of the display. Selected items are indicated by check marks (); to deselect, highlight the check marks and press MENU/OK.

Scale

Select ON to display the exposure indicator.

L1, L2, L3, L4

Choose up to four large icons for display on the left side of the screen.

R1, R2, R3, R4

Choose up to four large icons for display on the right side of the screen.

SUB MONITOR SETTING

Choose the items shown in the secondary LCD monitor.

  1. Press MENU/OK and select SCREEN SET-UP > SUB MONITOR SETTING in the (SET UP) tab.

  2. Select STILL MODE or MOVIE MODE.

  3. Highlight items for display in positions to and press MENU/OK to select or deselect. Items not available when MOVIE MODE is selected are indicated by asterisks (“*”).

    Text (items to ): SHUTTER SPEED, APERTURE, EXPO. COMP., ISO, MOVIE MODE, FRAMES REM. *, REC. TIME, NONE

    Icons (items to ): SHOOTING MODE, PHOTOMETRY, DRIVE MODE *, FOCUS MODE, WHITE BALANCE, IMAGE SIZE *, IMAGE QUALITY *, BATTERY LEVEL, CARD SLOT OPTIONS, SHUTTER TYPE *, FILM SIMULATION, DYNAMIC RANGE *, MOVIE MODE *, NONE

  4. Press DISP/BACK to save changes.

SUB MONITOR BACKGROUND COLOR

Make the display in the secondary monitor easier to read by choosing the background color suited to current ambient lighting conditions.

Option Description
BLACK Recommended for use with dark ambient lighting.
WHITE Recommended for use with bright ambient lighting.

Regardless of the option selected, the background is displayed in white whenever the secondary monitor backlight is on.