Enter a search term and click .

After charging the battery, insert the battery in the camera as described below.

  1. Open the battery-chamber cover.

    Slide the battery-chamber latch as shown and open the battery-chamber cover.

    Do not open the battery-chamber cover when the camera is on. Failure to observe this precaution could damage image files or memory cards.

    Do not use excessive force when handling the battery-chamber cover.

  2. Insert the battery.

    Using the battery to keep the battery latch pressed to one side, insert the battery contacts first in the direction shown by the arrow. Confirm that the battery is securely latched.

    Insert the battery in the orientation shown. Do not use force or attempt to insert the battery upside down or backwards. The battery will slide in easily in the correct orientation.

  3. Close the battery-chamber cover.

    Close and latch the cover.

    If the cover does not close, check that the battery is in the correct orientation. Do not attempt to force the cover shut.

Removing the Battery

Before removing the battery, turn the camera off and open the battery-chamber cover.

To remove the battery, press the battery latch to the side, and slide the battery out of the camera as shown.

The battery may become hot when used in high-temperature environments. Observe caution when removing the battery.