The camera can be used with lenses for the FUJIFILM G-mount.
DAperture ring lock release
EMounting marks (focal length)
GLens signal contacts
HFront lens cap
IRear lens cap
A GF63mmF2.8 R WR lens is used here for illustrative purposes.
- Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of Fujifilm lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied.
- Replace the front and rear caps when the lens is not in use.
Removing Lens Caps
Remove lens caps as shown.
Lens caps may differ from those shown.
Attaching Lens Hoods
When attached, lens hoods reduce glare and protect the front lens element.
In modes A (aperture-priority AE) and M (manual), you can choose the aperture (f-number) by rotating the lens aperture ring.
|With the aperture ring in the C or A position, you can choose the aperture (f-number) by rotating the camera command dial.
|Set aperture to the selected value.
To select C or A, or to select another value after selecting C or A, press the aperture ring lock release while rotating the aperture ring.
View the shift amount or rotate amount of lenses on the EVF or LCD (aCustomizing the Standard Display). The shift and rotate amounts are displayed in increments of 0.5 mm and 3°, respectively.
The shift amount and rotate amount are also recorded to the EXIF data of images that have been taken.