The Setup Menus (POWER MANAGEMENT)
Adjust power management settings.
To access power management settings, press MENU/OK, select the D (SET UP) tab, and choose POWER MANAGEMENT.
AUTO POWER OFF
Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if OFF is selected, the camera must be turned off manually.
|5 MIN||2 MIN||1 MIN||30 SEC||15 SEC||OFF|
Select BOOST to improve focus and viewfinder display performance.
Boost camera focus and viewfinder display performance. The battery drains faster than when is NORMAL selected.
|NORMAL||Choose for standard focus and viewfinder display performance and battery endurance.|
Choose whether the EVF prioritizes BRIGHTNESS PRIORITY or SMOOTHNESS PRIORITY.
|BRIGHTNESS PRIORITY||The EVF display prioritizes brightness. Recommended in most situations.|
|SMOOTHNESS PRIORITY||Minimize ghosting in the EVF display. Choose when photographing moving subjects. The brightness of the EVF may drop.|
SMOOTHNESS PRIORITY is only available when BOOST is selected for PERFORMANCE.
AUTO POWER OFF TEMP. (Available from Firmware Version 1.10)
If its temperature rises beyond a certain point, the camera will first display a message and then, if the temperature rise continues, automatically end shooting and power down. Choose the temperature at which the camera turns off automatically.
|STANDARD||The camera turns off automatically when its temperature reaches the STANDARD value.|
|HIGH||Shooting can continue at temperatures higher than the STANDARD value, extending the time available to record movies and the like. Because remaining in contact with the camera at these high temperatures could result in low-temperature burns, this option should only be used after mounting the camera on a tripod or taking other steps to avoid prolonged contact with the camera.|