The Setup Menus (CONNECTION SETTING)
Adjust settings for connection to other devices.
To access connection settings, press MENU/OK, select the D (SET UP) tab, and choose CONNECTION SETTING.
For more information on wireless connections, visit:
- Bluetooth SETTINGS
- PC AUTO SAVE
- instax PRINTER CONNECTION SETTING
- CONNECTION MODE
- USB POWER SUPPLY SETTING
- GENERAL SETTINGS
- INFORMATION
- RESET WIRELESS SETTING
Bluetooth SETTINGS
Adjust Bluetooth settings.
Option | Description |
---|---|
PAIRING REGISTRATION | To pair the camera with a smartphone or tablet, select this option, then launch FUJIFILM Camera Remote on the smart device and tap PAIRING REGISTRATION. |
SELECT PAIRING DESTINATION | Choose a connection from a list of devices with which the camera has been paired using PAIRING REGISTRATION. Select NO CONNECTION to exit without connecting. |
DELETE PAIRING REG. | Delete pairing information for selected devices. Choose the device in the device list. The selected device will also be removed from the devices listed in SELECT PAIRING DESTINATION. |
Bluetooth ON/OFF |
|
AUTO IMAGE TRANSFER |
|
SMARTPHONE SYNC. SETTING |
Choose whether to synchronize the camera to the time and/or location provided by a paired smartphone.
|
Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet before pairing the device with your camera or uploading images.
When ON is selected for both Bluetooth ON/OFF and AUTO IMAGE TRANSFER or images are currently selected for upload using the IMAGE TRANSFER ORDER option in the C (playback) menu, upload to paired devices will begin shortly after you exit to playback or turn the camera off. IMAGE TRANSFER ORDER can also be used to select pictures for upload when AUTO IMAGE TRANSFER is off.
PC AUTO SAVE
Adjust settings for connection to computers via wireless LAN.
Option | Description |
---|---|
PC AUTO SAVE SETTING |
Choose the method used for connection to computers via a wireless LAN.
|
DELETE REGISTERED DESTINATION PC | Remove selected destinations. |
DETAILS OF PREVIOUS CONNECTION | View computers to which the camera has recently connected. |
instax PRINTER CONNECTION SETTING
Adjust settings for connection to optional Fujifilm instax SHARE printers.
The Printer Name (SSID) and Password
The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.
CONNECTION MODE
Adjust settings for connection to a computer.
Option | Description |
---|---|
USB CARD READER | Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. The camera functions normally when not connected. |
X WEBCAM | The camera can be used as a webcam when connected to a computer running FUJIFILM X Webcam. |
USB RAW CONV./BACKUP RESTORE |
Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected.
|
Visit the websites below to learn more about or download the following computer software:
a Capture One Express Fujifilm
USB POWER SUPPLY SETTING
Choose whether power is supplied to the camera when it is connected to a computer or other device via a USB cable.
Option | Description |
---|---|
ON | The camera draws power from the connected device, reducing the drain on the camera battery. |
OFF | The camera does not draw power from the connected device. |
The camera cannot draw power from Lightning connections or from devices that do not supply power. Select OFF before connecting the camera to such devices. The connection may not be available for data transfer or the like when ON is selected.
The term “draw power” is used when the connected device supplies power to the camera.
Regardless of the option chosen, the battery will charge while the camera is off.
GENERAL SETTINGS
Adjust settings for connection to wireless networks.
Option | Description |
---|---|
NAME | Choose a name (NAME) to identify the camera on the wireless network (the camera is assigned a unique name by default). |
RESIZE IMAGE FOR SMARTPHONEH |
Choose whether to resize images for upload to smartphones. Resizing applies only to the copy uploaded to the smartphone; the original is not affected.
|
GEOTAGGING | Choose whether location data downloaded from a smartphone are embedded in pictures as they are taken. |
LOCATION INFO | Display the location data last downloaded from a smartphone. |
rBUTTON SETTING |
Choose the role played by function buttons assigned the WIRELESS COMMUNICATION function.
|
INFORMATION
View the camera’s MAC and Bluetooth address.
RESET WIRELESS SETTING
Restore wireless settings to their default values.