Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the latest information on the accessories available in your region, check with your local FUJIFILM representative or visit “Digital Cameras”.
- Rechargeable Li-ion batteries
NP-T125: Additional high-capacity NP‑T125 rechargeable batteries can be purchased as required.
- Battery chargers
BC-T125: Replacement battery chargers can be purchased as required.
- AC power adapters
AC-15V: Use this 100–240 V, 50/60 Hz AC power adapter for extended shooting and playback, when copying pictures to a computer, or to charge the battery in the camera or optional battery grip.
- Remote releases
RR-90: Use to reduce camera shake or keep the shutter open during a time exposure.
- Stereo microphones
MIC-ST1: An external microphone for movie recording.
- FUJINON lenses
GF-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM G-mount.
- Vertical battery grips
VG-GFX1: This grip accommodates an extra battery for improved endurance and makes it easier to hold the camera rotated 90° to frame pictures in “tall” (portrait) orientation. The battery in the grip can be charged using an optional AC-15V AC adapter.
- Tilt adapters
EVF-TL1: This adapter lets you swivel the viewfinder left or right ±45° or up or down between 0° and 90° to take shots from different angles.
- Shoe-mounted flash units
EF-X500: This clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the flash sync speed. Powered by four AA batteries or an optional EF-BP1 battery pack, it supports manual and TTL flash control and auto power zoom in the range 24–105 mm (35 mm format equivalent) and features FUJIFILM optical wireless flash control, allowing it to be used as a master or remote flash unit for remote wireless flash photography. The flash head can be rotated 90° up, 10° down, 135° left, or 180° right for bounce lighting.
EF-42: This clip-on flash unit (powered by four AA batteries) has a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL flash control and auto power zoom in the range 24–105 mm (35 mm format equivalent). The flash head can be rotated 90° up, 180° left, or 120° right for bounce lighting.
EF-X20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.). Powered by two AAA batteries, this light, compact unit features a dial for adjusting TTL flash compensation or manual flash output.
EF-20: This clip-on flash unit (powered by two AA batteries) has a Guide Number of 20/65 (ISO 100, m/ft.) and supports TTL flash control (manual flash control is not supported). The flash head can be rotated upwards 90° for bounce lighting.
- Body caps
- BCP-002: Cover the camera lens mount when no lens is attached.
- instax SHARE printers
- SP-1/SP-2/SP-3: Connect via wireless LAN to print pictures on instax film.