The Setup Menus (DCONNECTION SETTING)
Adjust settings for connection to other devices.
To access connection settings, press MENU/OK, select the D (SET UP) tab, and choose CONNECTION SETTING.
- WIRELESS SETTINGS
- GEOTAGGING SET-UP
- instax PRINTER CONNECTION SETTING
- PC CONNECTION MODE
Adjust settings for connection to wireless networks.
|GENERAL SETTINGS||Choose a name (NAME) to identify the camera on the wireless network (the camera is assigned a unique name by default) or select RESET WIRELESS SETTINGS to restore default settings.|
|RESIZE IMAGE FOR SMARTPHONE H||Choose ON (the default setting, recommended in most circumstances) to resize larger images to H for upload to smartphones, OFF to upload images at their original size. Resizing applies only to the copy uploaded to the smartphone; the original is not affected.|
|ACCESS POINT SETTINGS||
SIMPLE SETUP: Connect to an access point using simple settings.
MANUAL SETUP: Manually adjust settings for connection to a wireless network. Choose the network from a list (SELECT FROM NETWORK LIST) or enter the name manually (ENTER SSID).
AUTO: The IP address is assigned automatically.
MANUAL: Assign an IP address manually. Manually choose the IP address (IP ADDRESS), network mask (NETMASK), and gateway address (GATEWAY ADDRESS).
View location data downloaded from a smartphone and choose whether to save the data with your pictures.
|GEOTAGGING||Choose whether location data downloaded from a smartphone are embedded in pictures as they are taken.|
|LOCATION INFO||Display the location data last downloaded from a smartphone.|
For more information on wireless connections, visit:
instax PRINTER CONNECTION SETTING
Adjust settings for connection to optional FUJIFILM instax SHARE printers.
The Printer Name (SSID) and Password
The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.
PC CONNECTION MODE
Adjust settings for connection to a computer.
|USB CARD READER||Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. The camera functions normally when not connected.|
|USB TETHER SHOOTING AUTO||The camera can be controlled from a computer connected via USB. Photographs can be taken remotely and automatically downloaded to computers running Capture One, Adobe® Photoshop® Lightroom® + Tether Plugin, or FUJIFILM X Acquire. FUJIFILM X Acquire can also be used to save and load camera settings. The camera functions normally when not connected.|
|USB TETHER SHOOTING FIXED||As for USB TETHER SHOOTING AUTO, except that the camera remains in “tethered shooting” mode when the computer is not connected, allowing the computer to resume control when the connection is re-established after an accidental disconnection or other disruption. Note that at default settings, pictures are not recorded to the memory card.|
|WIRELESS TETHER SHOOTING FIXED||Choose this option for wireless remote photography. Select a network using DCONNECTION SETTING > WIRELESS SETTINGS.|
|USB RAW CONV./BACKUP RESTORE||
Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected.
USB RAW CONV. (requires FUJIFILM X RAW STUDIO): Use the camera’s image processing engine to rapidly convert RAW files to high-quality JPEG images.
BACKUP RESTORE (requires FUJIFILM X Acquire): Save and load camera settings. Reconfigure the camera in an instant or share settings with other cameras of the same type.
DPOWER MANAGEMENT > AUTO POWER OFF settings also apply during tethered shooting. To prevent the camera turning off automatically, select OFF for AUTO POWER OFF.
Visit the websites below to learn more about or download the following computer software:
View the camera’s MAC address.