Enter a search term and click .

[CONNECTION SETTING]

Adjust settings for connection to other devices.

To access connection settings, press [MENU/OK], select the D ([SET UP]) tab, and choose [CONNECTION SETTING].

For more information on wireless connections, visit:

aConnecting to Smartphones and Computers

[Bluetooth SETTINGS]

Adjust Bluetooth settings.

[PAIRING REGISTRATION]

Pair the camera with a smartphone running the FUJIFILM Camera Remote app.

[SELECT PAIRING DESTINATION]

Choose a connection from a list of devices with which the camera has been paired using [PAIRING REGISTRATION]. Select [NO CONNECTION] to exit without connecting.

[DELETE PAIRING REG.]

Delete pairing information for selected devices. Choose the device in the device list. The selected device will also be removed from the devices listed in [SELECT PAIRING DESTINATION].

[Bluetooth DEVICE LIST]

List the devices with which the camera is paired (other than the smartphone) or end pairing with selected devices.

[Bluetooth ON/OFF]

Option Description
[ON] The camera automatically establishes a Bluetooth connection with paired devices when turned on.
[OFF] The camera does not connect via Bluetooth.

[AUTO IMAGE TRANSFER]

Option Description
[ON] Mark photos for upload as they are taken. Mark JPEG photos for upload as they are taken.
[OFF] Photos are not marked for upload as they are taken.

[SMARTPHONE SYNC. SETTING]

Choose whether to synchronize the camera to the time and/or location provided by a paired smartphone.

Option Description
[LOCATION&TIME] Synchronize the time and location.
[LOCATION] Synchronize the location.
[TIME] Synchronize the time.
[OFF] Synchronization off.

Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet before pairing the device with your camera or uploading images.

When [ON] is selected for both [Bluetooth ON/OFF] and [AUTO IMAGE TRANSFER] or images are currently selected for upload using the [IMAGE TRANSFER ORDER] option in the C (playback) menu, upload to paired devices will begin shortly after you exit to playback or turn the camera off. [IMAGE TRANSFER ORDER] can also be used to select pictures for upload when [AUTO IMAGE TRANSFER] is off.

[PC AUTO SAVE]

Adjust settings for connection to computers via wireless LAN.

[PC AUTO SAVE SETTING]

Choose the method used for connection to computers via a wireless LAN.

Option Description
[SIMPLE SETUP] Connect using WPS.
[MANUAL SETUP] Choose the network from a list ([SELECT FROM NETWORK LIST]) or enter the name manually ([ENTER SSID]).

[DELETE REGISTERED DESTINATION PC]

Remove selected destinations.

[DETAILS OF PREVIOUS CONNECTION]

View computers to which the camera has recently connected.

These settings also apply when pictures are downloaded to a computer using “FUJIFILM PC AutoSave” software.

[instax PRINTER CONNECTION SETTING]

Adjust settings for connection to optional Fujifilm instax SHARE printers.

The Printer Name (SSID) and Password

The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.

[CONNECTION MODE]

Adjust settings for connection to external devices.

Option Description
[USB CARD READER] Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. The camera functions normally when not connected.
[X WEBCAM] The camera can be used as a webcam when connected to a computer running FUJIFILM X Webcam.
[USB MOVIE SHOOTING AUTO] * The camera’s movie-recording features can be controlled from gimbals, drones, or other devices connected via USB. The camera automatically enters “tethered shooting” (i.e., remote-control) mode when the external device is turned on and returns to normal operation when the external device turned off or disconnected. The features available vary with the type of device connected.
[USB MOVIE SHOOTING FIXED] * As for [USB MOVIE SHOOTING AUTO], except that the camera remains in “tethered shooting” (remote-control) mode when the external device is off or not connected, allowing the device to resume control when the connection is re-established after an accidental disconnection or other disruption.
[USB RAW CONV.]/[BACKUP RESTORE]

Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected.

  • [USB RAW CONV.] (requires FUJIFILM X RAW STUDIO): Use the camera's image processing engine to rapidly convert RAW files to high-quality JPEG images.
  • [BACKUP RESTORE] (requires FUJIFILM X Acquire): Save and load camera settings. Reconfigure the camera in an instant or share settings with other cameras of the same type.

* Rotate the drive dial to F (movie).

For information on compatible computer software, see “Software for Use with Your Camera”.

[USB POWER SUPPLY SETTING]

Choose whether power is supplied to the camera when it is connected to a computer or other device via a USB cable.

Option Description
[ON] The camera draws power from the connected device, reducing the drain on the camera battery.
[OFF] The camera does not draw power from the connected device.

The camera cannot draw power from Lightning connections or from devices that do not supply power. Select [OFF] before connecting the camera to such devices. The connection may not be available for data transfer or the like when [ON] is selected.

Regardless of the option selected, the battery will charge while the camera is off.

[GENERAL SETTINGS]

Adjust settings for connection to wireless networks.

[NAME]

Choose a name ([NAME]) to identify the camera on the wireless network (the camera is assigned a unique name by default).

[RESIZE IMAGE FOR SMARTPHONE]H

Choose whether to resize images for upload to smartphones. Resizing applies only to the copy uploaded to the smartphone; the original is not affected.

Option Description
[ON] Larger images are resized to H for upload.
[OFF] Images are uploaded at their original size.

[GEOTAGGING]

Choose whether location data downloaded from a smartphone are embedded in pictures as they are taken.

Options
[ON] [OFF]

[LOCATION INFO]

Display the location data last downloaded from a smartphone.

Options
[ON] [OFF]

r[BUTTON SETTING]

Choose the role played by the [Fn1] button during playback.

Option Description
s[PAIRING/TRANSFER ORDER] The [Fn1] button can be used for pairing and selecting images for transfer during playback.
r[WIRELESS COMMUNICATION] The [Fn1] button can be used during playback to establish wireless connections.

[INFORMATION]

View the camera’s MAC and Bluetooth address.

[RESET WIRELESS SETTING]

Restore wireless settings to their default values.