Automatically vary settings over a series of pictures.
Press the [DRIVE] button to display drive mode options.
Choose a bracketing type and (if [ISO BKT] or [WHITE BALANCE BKT] is selected) a bracketing amount.
Press [MENU/OK] to end drive mode selection.
Use [SHOOTING SETTING] > [AE BKT SETTING] to choose the bracketing amount and number of shots. Each time the shutter button is pressed, the camera will take the specified number of shots: one using the metered value for exposure and the others over- or under-exposed by multiples of the selected bracketing amount ( AE BKT SETTING).
Regardless of the bracketing amount, exposure will not exceed the limits of the exposure metering system.
Select a bracketing amount (±1, ±2/3, or ±1/3). Each time the shutter is released, the camera will take a picture at the current sensitivity and process it to create two additional copies, one with sensitivity raised and the other with sensitivity lowered by the selected amount.
Each time the shutter is released, the camera takes one shot and processes it to create copies with different film simulation settings, chosen using [SHOOTING SETTING] > [FILM SIMULATION BKT] ( FILM SIMULATION BKT).
Select a bracketing amount (±1, ±2, or ±3). Each time the shutter is released, the camera takes one shot and processes it to create three copies: one at the current white balanced setting, one with fine-tuning increased by the selected amount, and another with fine-tuning decreased by the selected amount.
Each time the shutter button is pressed, the camera takes three shots with different dynamic ranges: 100% for the first, 200% for the second, and 400% for the third.
While dynamic range bracketing is in effect, sensitivity will be restricted to a minimum of ISO 800 (or to a minimum of ISO 200 to 800 when an auto option is selected for sensitivity); the sensitivity previously in effect is restored when bracketing ends.