Adjust settings for connection to other devices.
To access connection settings, press [MENU/OK], select the ([SET UP]) tab, and choose [CONNECTION SETTING].
For more information on wireless connections, visit:
Adjust Bluetooth settings.
|[PAIRING REGISTRATION]||To pair the camera with a smartphone or tablet, select this option, then launch [FUJIFILM Camera Remote] on the smart device and tap [PAIRING REGISTRATION].|
|[SELECT PAIRING DESTINATION]||Select a smartphone to which to connect from a list of paired devices.|
|[DELETE PAIRING REG.]||End pairing.|
[ON]: The camera automatically establishes a Bluetooth connection with paired devices when turned on.
[OFF]: The camera does not connect via Bluetooth.
|[AUTO IMAGE TRANSFER]||
[ON]: Mark JPEG images for upload as they are taken.
[OFF]: Photos are not marked for upload as they are taken.
|[SMARTPHONE SYNC. SETTING]||
Choose whether to synchronize the camera to the time and/or location provided by a paired smartphone.
[LOCATION&TIME]: Synchronize the time and location.
[LOCATION]: Synchronize the location.
[TIME]: Synchronize the time.
[OFF]: Synchronization off.
Install the latest version of the [FUJIFILM Camera Remote] app on your smartphone or tablet before pairing the device with your camera or uploading images.
When [ON] is selected for both [Bluetooth ON/OFF] and [AUTO IMAGE TRANSFER], upload to paired devices will begin shortly after you exit to playback or turn the camera off.
If [AUTO IMAGE TRANSFER] is off, pictures can be marked for transfer using the [IMAGE TRANSFER ORDER] option in the playback menu.
Adjust settings for connection to computers via wireless LAN.
|[PC AUTO SAVE SETTING]||
Choose the method used for connection to computers via a wireless LAN.
[SIMPLE SETUP]: Connect using WPS.
[MANUAL SETUP]: Choose the network from a list ([SELECT FROM NETWORK LIST]) or enter the name manually ([ENTER SSID]).
|[DELETE REGISTERED DESTINATION PC]||Remove selected destinations.|
|[DETAILS OF PREVIOUS CONNECTION]||View computers to which the camera has recently connected.|
Adjust settings for connection to optional [FUJIFILM instax SHARE] printers.
The Printer Name (SSID) and Password
The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.
Adjust settings for connection to wireless networks.
|[NAME]||Choose a name ([NAME]) to identify the camera on the wireless network (the camera is assigned a unique name by default).|
|[RESIZE IMAGE FOR SMARTPHONE ]||Choose [ON] (the default setting, recommended in most circumstances) to resize larger images to for upload to smartphones, [OFF] to upload images at their original size. Resizing applies only to the copy uploaded to the smartphone; the original is not affected.|
|[GEOTAGGING]||Choose whether location data downloaded from a smartphone are embedded in pictures as they are taken.|
|[LOCATION INFO]||Display the location data last downloaded from a smartphone.|
View the camera’s MAC and Bluetooth address.
Restore wireless settings to their default values.
Adjust settings for connection to a computer.
|[USB CARD READER]||Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. The camera functions normally when not connected.|
|[USB RAW CONV./
Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected.
[USB RAW CONV.] (requires FUJIFILM X RAW STUDIO): Use the camera’s image processing engine to rapidly convert RAW files to high-quality JPEG images.
[BACKUP RESTORE] (requires FUJIFILM X Acquire): Save and load camera settings. Reconfigure the camera in an instant or share settings with other cameras of the same type.