Enter a search term and click .

Adjust time code (hour, minute, second, and frame number) display settings for movie recording.


To display time code settings, press MENU/OK in the movie shooting display and select the Q (TIME CODE SETTING) tab.


TIME CODE DISPLAY

Select ON to display time codes during movie recording and playback.

Options
ON OFF

START TIME SETTING

Choose the time code starting time.

Option Description
MANUAL INPUT Choose a start time manually.
CURRENT TIME Set the start time to the current time.
RESET Set the start time to 00:00:00.

COUNT UP SETTING

Choose whether time is clocked continuously or only during movie recording.

Option Description
REC RUN Time is clocked only during movie recording.
FREE RUN Time is clocked continuously.

DROP FRAME

At frame rates of 59.94P, and 29.97P, a discrepancy will gradually develop between the time code (measured in seconds) and the actual recording time (measured in fractions of a second). Choose whether the camera drops frames as necessary to match the recording time to the time code.

Option Description
ON The camera drops frames as necessary to maintain a strict match between the time code and the actual recording time.
OFF Frames are not dropped.

The time code display varies with the option selected.

ON

OFF

Selecting a frame rate of 23.98P disables frame drop.

HDMI TIME CODE OUTPUT

Choose whether time codes are output to HDMI devices.

Options
ON OFF