Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.
Press the DRIVE button to display drive mode options.
If JCH HIGH SPEED BURST, JCH HIGH SPEED BURST (1.25X CROP), or OCL LOW SPEED BURST is selected, the camera will take pictures continuously while the shutter-release button is pressed.
Shooting ends when the shutter button is released or the memory card is full.
If file numbering reaches 9999 before shooting is complete, the remaining pictures will be recorded to a new folder.
Shooting ends when the memory card is full; the camera will record all photos shot to that point. Burst shooting may not begin if the space available on the memory card is insufficient.
Frame rates may slow as more shots are taken.
Frame rate varies with the scene, shutter speed, sensitivity, and focus mode.
Depending on shooting conditions, frame rates may slow or the flash may not fire.
Recording times may increase during burst shooting.
The choice of burst modes varies with the option selected for ASHOOTING SETTING > SHUTTER TYPE.
Focus and Exposure
- Select focus mode CONTINUOUS AF to vary focus with shot.
- To vary exposure with each shot, select OFF for DBUTTON/DIAL SETTING > SHUTTER AE.
Depending on such factors as aperture, sensitivity, and exposure compensation, exposure may not be adjusted automatically.