The Playback Menu
Adjust playback settings.
The playback menu is displayed when you press MENU/OK in playback mode.
Choose the card from which images will be played back.
If two memory cards are inserted, you can press and hold the a button to choose a card for playback.
Even if you don't have a computer, you can use the camera to modify RAW pictures and save them in other formats.
Saving RAW Pictures in Another Format
Display a RAW picture.
Highlight RAW CONVERSION in the playback menu.
A list of settings will be displayed.
Press the focus stick (focus lever) up or down to highlight a setting.
Press the focus stick right to display options.
Press the focus stick up or down to highlight the desired option.
Press MENU/OK to select the highlighted option.
The settings list shown in Step 3 will be displayed. Repeat Steps 4 to 7 to adjust additional settings.
Press the Q button.
A preview of the copy will be displayed.
The copy will be saved.
RAW conversion options can also be displayed by pressing the Q button when a RAW pictures is displayed during playback.
The settings that can be adjusted when converting pictures from RAW to another format are:
|REFLECT SHOOTING COND.||Create a copy using the settings in effect at the time the photo was taken.|
|FILE TYPE||Choose a file format.|
|IMAGE SIZE||Choose an image size.|
|IMAGE QUALITY||Adjust image quality.|
|PUSH/PULL PROCESSING||Adjust exposure.|
|DYNAMIC RANGE||Enhance details in highlights for natural contrast.|
|D RANGE PRIORITY||Reduce loss of detail in highlights and shadows for natural-looking results when photographing high-contrast scenes.|
|FILM SIMULATION||Simulate the effects of different types of film.|
|MONOCHROMATIC COLOR||Choose a monochrome tint for photographs taken using FILM SIMULATION > aACROS and bMONOCHROME.|
|GRAIN EFFECT||Add a film grain effect.|
|COLOR CHROME EFFECT||Increase the range of tones available for rendering colors that tend to be highly saturated, such as reds, yellows, and greens.|
|COLOR CHROME FX BLUE||Increase the range of tones available for rendering blues.|
|WHITE BALANCE||Adjust white balance.|
|WB SHIFT||Fine-tune white balance.|
|TONE CURVE||Adjust highlights and shadows.|
|COLOR||Adjust color density.|
|SHARPNESS||Sharpen or soften outlines.|
|HIGH ISO NR||Process the copy to reduce mottling.|
|LENS MODULATION OPTIMIZER||Improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens.|
|COLOR SPACE||Choose the color space used for color reproduction.|
|HDR MODE||Reduce loss of detail in highlights and shadows.|
Some settings may be unavailable depending on the options chosen when the picture was taken.
HEIF TO JPEG/TIFF CONVERSION
Convert HEIF pictures to JPEG or TIFF.
Select HEIF pictures for conversion.
Choose a format for the converted pictures.
|JPEG||TIFF 8bit||TIFF 16bit|
SELECT SLOT TO RECORD
Choose the memory card to which the converted pictures will be saved.
Delete individual pictures, multiple selected pictures, or all pictures.
Deleted pictures cannot be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding.
|FRAME||Delete pictures one at a time.|
|SELECTED FRAMES||Delete multiple selected pictures.|
|ALL FRAMES||Delete all unprotected pictures.|
Select FRAME for ERASE in the playback menu.
Press the focus stick (focus lever) left or right to scroll through pictures and press MENU/OK to delete.
A confirmation dialog is not displayed before pictures are deleted; be sure the correct picture is selected before pressing MENU/OK.
Additional pictures can be deleted by pressing MENU/OK. Press the focus stick left or right to scroll through pictures and press MENU/OK to delete.
Select SELECTED FRAMES for ERASE in the playback menu.
Highlight pictures and press MENU/OK to select.
- Selected pictures are indicated by check marks (R).
- To deselect a highlighted picture, press MENU/OK again.
When the operation is complete, press DISP/BACK to display a confirmation dialog.
Highlight OK and press MENU/OK to delete the selected pictures.
Pictures in photobooks or printer orders are shown by S.
Select ALL FRAMES for ERASE in the playback menu.
A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures.
Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed cannot be recovered.
If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete the pictures.
Taking photos with SEPARATE selected for DSAVE DATA SET-UP > xCARD SLOT SETTING creates two copies. Choose whether deleting the RAW image will also delete the JPEG or HEIF copy.
|ON||Deleting the RAW image from the card in Slot 1 also deletes the JPEG or HEIF copy from the card in Slot 2.|
|OFF||Deleting the RAW image from the card in Slot 1 does not delete the JPEG or HEIF copy from the card in Slot 2.|
Create a cropped copy of the current picture.
Display the desired picture.
Select CROP in the playback menu.
Use the rear command dial to zoom in and out and press the focus stick (focus lever) up, down, left, or right to scroll the picture until the desired portion is displayed.
Press MENU/OK to display a confirmation dialog.
Press MENU/OK again to save the cropped copy to a separate file.
The higher the zoom ratio, the smaller the number of pixels in the cropped copy.
If the size of the final copy will be a, YES will be displayed in yellow.
All copies have an aspect ratio of 3:2.
Create a small copy of the current picture.
Display the desired picture.
Select RESIZE in the playback menu.
Highlight a size and press MENU/OK to display a confirmation dialog.
Press MENU/OK again to save the resized copy to a separate file.
The sizes available vary with the size of the original image.
Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK.
Protect selected pictures. Press the focus stick (focus lever) left or right to view pictures and press MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.
|SET ALL||Protect all pictures.|
|RESET ALL||Remove protection from all pictures.|
Protected pictures will be deleted when the memory card is formatted.
Protecting images currently selected for upload to paired smartphones or tablets removes upload marking.
Protection can also be added or removed by pressing the Fn1 button during playback.
Select ON for DSCREEN SET-UP > AUTOROTATE PB.
Display the desired picture.
Select IMAGE ROTATE in the playback menu.
Press the focus stick (focus lever) down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise.
Press MENU/OK. The picture will automatically be displayed in the selected orientation whenever it is played back on the camera.
Protected pictures cannot be rotated. Remove protection before rotating pictures.
The camera may not be able to rotate pictures created with other devices. Pictures rotated on the camera will not be rotated when viewed on a computer or on other cameras.
Pictures taken with DSCREEN SET-UP > AUTOROTATE PB are automatically displayed in the correct orientation during playback.
VOICE MEMO SETTING
Add a voice memo to the current photograph.
Select ON for VOICE MEMO SETTING in the playback menu.
Display a photo to which you wish to add a voice memo.
Press and hold the AFON button to record a voice memo. RecordingRecording ends after 30 s or when you release the button.
The new memo will be recorded over any existing memos.
Voice memos cannot be added to protected pictures.
Deleting the picture also deletes the memo.
Playing Voice Memos
Pictures with voice memos are indicated by q icons during playback.
- To play the memo, press the AFON button.
- A progress bar will be displayed while the memo plays back.
- Volume can be adjusted by pressing MENU/OK to pause playback and then pressing the focus stick (focus lever) up or down to adjust the volume. Press MENU/OK again to resume playback. Volume can also be adjusted using DSOUND SET-UP > PLAYBACK VOLUME.
Rate pictures using stars.
Select RATING in the playback menu.
Rotate the front command dial to choose a picture and the rear command dial to choose a rating of from 0 to 5 stars (“I”).
The focus stick (focus lever) can be used in place of the front command dial to choose a picture.
The rating dialog can also be displayed by pressing the AEL button in single-frame, nine-frame, or hundred-frame playback.
Use touch controls to zoom in or out.
Ratings cannot be applied to:
- Protected pictures
- “Gift” pictures (pictures taken with other cameras)
Copy pictures between the cards in the first and second slots.
Select COPY in the playback menu.
Highlight one of the following options.
Option Description SLOT1 y
Copy pictures from the card in the first slot to the card in the second slot. SLOT2 y
Copy pictures from the card in the second slot to the card in the first slot.
Press the focus stick (focus lever) right.
Highlight one of the following options and press MENU/OK.
Option Description FRAME
Copy selected pictures.
Press the focus stick left or right to view pictures and press MENU/OK to copy the current picture.
ALL FRAMES Copy all pictures.
Copying ends when the destination is full.
If you attempt to copy a file over 4 GB in size to a memory card with a capacity of 32 GB or less, copying will end and the file will not be copied.
TRANSFER IMAGE TO SMARTPHONE
Select photos for upload to a paired smartphone or tablet via Bluetooth.
For information on pairing the camera with a smartphone or tablet, visit:
Select TRANSFER IMAGE TO SMARTPHONE > SELECT IMAGE & TRANSFER
Select RESET to remove “upload to smartphone” marking from all pictures before proceeding.
Mark pictures for upload.
Highlight pictures and press MENU/OK to mark them for upload.
- To switch to the memory card in the other slot or display only pictures that meet selected criteria, press DISP/BACK before marking begins.
- To select all pictures, press the Q button.
- Selecting any two pictures with the AEL button also selects all pictures between them.
Press DISP/BACK and select START TRANSFER.
The selected pictures will be uploaded.
Filtering Pictures/Choosing a Slot
To switch to the memory card in the other slot or display only pictures that meet selected criteria, press DISP/BACK in the picture-selection dialog.
- To display only pictures that meet selected criteria, choose FILTERING.
- To switch to the memory card in the other slot, choose SWITCH MEMORY CARD SLOT.
Switching slots or changing the filter criteria removes any existing upload marking.
Image transfer orders can contain a maximum of 999 pictures.
The following cannot be selected for upload:
- Protected pictures
- RAW images
- “Gift” pictures (pictures taken with other cameras)
If ON is selected for both IMAGE TRANSFER WHILE POWER OFF and Bluetooth/SMARTPHONE SETTING > Bluetooth ON/OFF in the network/USB settings menu, upload to the paired device will continue even while the camera is off.
When aSMARTPHONE TRANSFER ORDER is selected for DBUTTON/DIAL SETTING > aISO BUTTON SETTING, the picture-selection dialog can be displayed by pressing the ISO button.
Connect to smartphones running the latest apps. The smartphone can then be used to:
- Control the camera and take pictures remotely
- Receive pictures uploaded from the camera
- Browse the pictures on the camera and download selected pictures
- Upload location data to the camera
For downloads and other information, visit:
aUsing Your Camera with Smartphones, Tablets, and Computers
If rWIRELESS COMMUNICATION is selected for DBUTTON/DIAL SETTING > aISO BUTTON SETTING, you can connect to the smartphone using the ISO button.
View pictures in an automated slide show. Press MENU/OK to start and press the focus stick (focus lever) right or left to skip ahead or back. Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at any time by pressing MENU/OK.
The camera will not turn off automatically while a slide show is in progress.
Create books from your favorite photos.
Creating a Photobook
Select NEW BOOK for C PLAY BACK MENU > PHOTOBOOK ASSIST.
Scroll through the images and press the focus stick (focus lever) up to select or deselect. Press MENU/OK to exit when the book is complete.
Neither photographs a or smaller nor movies can be selected for photobooks.
The first picture selected becomes the cover image. Press the focus stick down to select the current image for the cover instead.
Highlight COMPLETE PHOTOBOOK and press MENU/OK (to select all photos for the book, choose SELECT ALL). The new book will be added to the list in the photobook assist menu.
Books can contain up to 300 pictures.
Books that contain no photos are automatically deleted.
Highlight a book in the photobook assist menu and press MENU/OK to display the book, then press the focus stick (focus lever) left or right to scroll through the pictures.
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the on-screen instructions.
- EDIT: Edit the book as described in “Creating a Photobook”.
- ERASE: Delete the book.
PRINT ORDER (DPOF)
Create a digital “print order” for DPOF-compatible printers.
Select CPLAY BACK MENU > PRINT ORDER (DPOF).
Select WITH DATEs to print the date of recording on pictures, WITHOUT DATE to print pictures without dates, or RESET ALL to remove all pictures from the print order before proceeding.
Display a picture you wish to include in or remove from the print order.
Press the focus stick (focus lever) up or down to choose the number of copies (up to 99).
To remove a picture from the order, press the focus stick down until the number of copies is 0.
Repeat steps 3–4 to complete the print order.
The total number of prints is displayed in the monitor. Press MENU/OK to exit.
The pictures in the current print order are indicated by a u icon during playback.
Print orders can contain a maximum of 999 pictures from a single memory card.
If a memory card is inserted containing a print order created by another camera, you will need to delete the order before creating as described above.
instax PRINTER PRINT
To print pictures to optional Fujifilm instax SHARE printers, first select instax PRINTER CONNECTION SETTING in the network/USB settings menu and enter the instax SHARE printer name (SSID) and password, then follow the steps below.
Turn the printer on.
Select CPLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer.
Use the focus stick (focus lever) to display the picture you want to print, then press MENU/OK. The picture will be sent to the printer and printing will start.
Pictures taken with other cameras cannot be printed.
The area printed is smaller than the area visible in the LCD monitor.
The displays may vary depending on the printer connected.
Choose the aspect ratio used for the display of still pictures on High Definition (HD) devices (this option is available only when an HDMI cable is connected).
Choose 16:9 to display photos with an aspect ratio of 3:2 full screen. The pictures will be displayed full screen with tops and bottoms cropped out.