.Viewfinder Tilt Adapters
The optional EVF-TL1 tilt adapter lets you swivel the viewfinder left or right ±45° or up or down between 0° and 90°.
AHot shoe
BTilt lock knob
CAdapter lock release
DHorizontal swivel lock
EConnectors
FConnector cover
GHot shoe cover
Attaching the EVF-TL1
Slide the EVF-TL1 onto the camera hot shoe and then attach the EVF-GFX3 electronic viewfinder.
Remove the hot shoe covers from the camera and EVF-TL1 before attaching the adapter and viewfinder.
Removing the EVF-TL1
Remove the viewfinder and then, keeping the lock releases (A) pressed, press down on the front of the adapter (B) and slide it from the camera as shown.
Use only one tilt adapter at a time.
Using the EVF-TL1
Swivel the viewfinder into the desired position.
Swiveling the Viewfinder Up or Down
Loosen the tilt lock knob and swivel the viewfinder up or down from 0° to 90°.
With the viewfinder in the desired position (A), tighten the tilt lock knob (B) to lock the viewfinder in place.
Swiveling the Viewfinder Left or Right
Release the horizontal swivel lock as shown and swivel the viewfinder left or right ±45°.
With the viewfinder in the desired position (A), return the horizontal swivel lock to the latched position (B) to lock the viewfinder in place.
