Enter a search term and click .

Adjust power management settings.


To access power management settings, press MENU/OK, select the D (SET UP) tab, and choose POWER MANAGEMENT.


AUTO POWER OFF

Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if OFF is selected, the camera must be turned off manually.

Options
5 MIN 2 MIN 1 MIN 30 SEC 15 SEC OFF

PERFORMANCE

Select BOOST to improve focus and EVF display performance.

Option Description
BOOST

Boost camera focus and EVF display performance. The battery drains faster than when is NORMAL selected.

You can choose to assign priority to:

  • AF PRIORITY - NORMAL: Focus speed.
  • AF PRIORITY - LOW LIGHT: Focus speed while adjusting EVF and LCD brightness to make objects in shadows easier to see. Some ghosting may be visible with blurred images.
  • EVF RESOLUTION PRIORITY: Viewfinder resolution.
  • EVF FRAME RATE PRIORITY (120P): The refresh rate for the EVF is increased, smoothing motion.
  • EVF FRAME RATE PRIORITY (240P EQUIV.): The refresh rate for the EVF is increased beyond EVF FRAME RATE PRIORITY (120P) smoothing motion still further. The EVF may darken.

Regardless of the option selected, the camera functions in AF PRIORITY - NORMAL mode while the monitor is on.

The DSCREEN SET-UP > EVF FULL SCREEN MAGNIFICATION setting cannot be changed when either EVF FRAME RATE PRIORITY (120P) or EVF FRAME RATE PRIORITY (240P EQUIV.) is set. With these settings, the screen magnification is set to 0.77x.

NORMAL Choose for standard focus and EVF display performance and battery endurance.

SHOOTING STAND BY MODE

Choose the delay before the camera enters shooting standby mode.

Option Description
5 MIN The camera will suspend all functions and enter powering-saving (standby) mode if no operations are performed for the selected period.
2 MIN
1 MIN
30 SEC
15 SEC
OFF Shooting standby mode disabled.

AUTO POWER SAVE

If ON is selected, the display frame rate will drop to save power if no operations are performed for a short period, but the normal frame rate can be restored by operating camera controls.

Options
ON OFF

AUTO POWER OFF TEMP.

If its temperature rises beyond a certain point, the camera will first display a message and then, if the temperature rise continues, automatically end shooting and power down. Choose the temperature at which the camera turns off automatically.

Option Description
STANDARD The camera turns off automatically when its temperature reaches the STANDARD value.
HIGH Shooting can continue at temperatures higher than the STANDARD value, extending the time available to record movies and the like. ecause remaining in contact with the camera at these high temperatures could result in low-temperature burns, this option should only be used after mounting the camera on a tripod or taking other steps to avoid prolonged contact with the camera.