Enter a search term and click .

Make changes to display settings.


To access display settings, press MENU/OK, select the D (SET UP) tab, and choose SCREEN SET-UP.


VIEW MODE SETTING

Adjust settings for eye sensor, EVF (electronic viewfinder), or LCD monitor view modes (aChoosing a Display Mode).

EVF BRIGHTNESS

Adjust the brightness of the display in the electronic viewfinder.

Option Description
AUTO The camera automatically adjusts brightness around a selected level in response to changes in ambient lighting conditions.
MANUAL Adjust brightness manually; choose from options between −7 and +5.

EVF COLOR

Adjust the saturation of the display in the electronic viewfinder.

Options
-5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5

EVF COLOR ADJUSTMENT

Adjust the color of the display in the electronic viewfinder.

  1. Adjust colors using the focus stick (focus lever).

  2. Press MENU/OK.

LCD BRIGHTNESS

Adjust monitor brightness.

Options
-5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5

LCD COLOR

Adjust monitor saturation.

Options
-5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5

LCD COLOR ADJUSTMENT

Adjust the color of the display in the LCD monitor.

  1. Adjust colors using the focus stick (focus lever).

  2. Press MENU/OK.

IMAGE DISP.

Choose how long images are displayed after shooting.

Option Description
CONTINUOUS Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the focus stick (focus lever); press again to cancel zoom.
1.5 SEC/0.5 SEC Pictures are displayed for the selected time or until the shutter button is pressed halfway.
OFF Pictures are not displayed after shooting.

Colors may differ slightly from those in the final image.

“Noise” mottling may be visible at high sensitivities.

AUTOROTATE DISPLAYS

Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation.

Options
ON OFF

PREVIEW EXP./WB IN MANUAL MODE

Choose whether to enable exposure and/or white balance preview in manual exposure mode.

Option Description
PREVIEW EXP./WB Enable exposure and white balance preview.
PREVIEW WB Preview white balance only. Choose this option in situations in which exposure is likely to change during shooting, as may be the case when you use a flash during daylight.
OFF Disable exposure and white balance preview. Choose this option in situations in which both exposure and white balance are likely to change during shooting, as may be the case when you use a flash with an incandescent monitoring lamp.

NATURAL LIVE VIEW

Choose whether the effects of film simulation, white balance, and other settings are visible in the monitor.

Option Description
ON The effects of camera settings are not visible in the monitor, but shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible. Colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of monochrome and sepia settings.
OFF The effects of film simulation, white balance, and other settings can be previewed in the monitor.

F-Log VIEW ASSIST

Select ON to display a tone-corrected preview (equivalent to BT.709) when recording or viewing F-log movies.

Options
ON OFF

ELECTRONIC LEVEL SETTING

Adjust settings for use when taking pictures using the virtual horizon display (aVirtual Horizon).

FRAMING GUIDELINE

Choose a framing grid for shooting mode.

Option Description Display
FGRID 9 For “rule of thirds” composition.
GGRID 24 A six-by-four grid.
HHD FRAMING Frame HD pictures in the crop shown by the lines at the top and bottom of the display.

Framing guides are not shown at default settings but can be displayed using DSCREEN SET-UP > DISP. CUSTOM SETTING (aCustomizing the Standard Display).

AUTOROTATE PB

Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback.

Options
ON OFF

PLAYBACK MAGNIFICATION

Choose the zoom ratio selected when the center of the rear command dial is pressed during playback.

Option Description
2x (FROM CENTER) View the center area of the picture at the selected zoom ratio. Regardless of the setting selected, pictures will not be displayed at greater than actual size.
4x (FROM CENTER)
8x (FROM CENTER)
ACTUAL SIZE (FROM FOCUS POINT) View the picture at actual size, centered on the focus area. The zoom ratio varies with the size of the image.
PREVIOUS MAG. (FROM CENTER) Display each picture at the same zoom ratio as the previous picture, starting at the center of the image. Pictures will not, however, be displayed at greater than actual size.

FOCUS SCALE UNITS

Choose the units used for the focus distance indicator.

Options
METERS FEET

DUAL DISPLAY SETTING

Choose the content of the two windows in the dual display.

Option Description
R:FOCUS L:FRAME The right (small) window shows a close-up of the focus area, while the left (large) window shows the entire frame.
R:FRAME L:FOCUS The right (small) window shows the entire frame, while the left (large) window shows a close-up of the focus area.

EVF FULL SCREEN MAGNIFICATION

Choose the magnification of the full-screen EVF display.

Options
1.00x 0.94x 0.89x 0.83x

The screen magnification cannot be changed when DPOWER MANAGEMENT > PERFORMANCE is either EVF FRAME RATE PRIORITY (120P) or EVF FRAME RATE PRIORITY (240P EQUIV.). With these settings, the screen magnification is set to 0.77x.

DISP. CUSTOM SETTING

Choose the items shown in the standard indicator display (aCustomizing the Standard Display).

LARGE INDICATORS MODE(EVF)

Select ON to display large indicators in the electronic viewfinder. The indicators displayed can be selected using DSCREEN SET-UP > LARGE INDICATORS DISP. SETTING.

OFF

ON

Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(EVF) (aThe Electronic Viewfinder).

If LARGE INDICATORS MODE is assigned to a function button, the button can be used to toggle LARGE INDICATORS MODE on (ON) and off (OFF) (aFunction Controls).

LARGE INDICATORS MODE(LCD)

Select ON to display large indicators in the LCD monitor. The indicators displayed can be selected using DSCREEN SET-UP > LARGE INDICATORS DISP. SETTING.

OFF

ON

Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(LCD) (aThe LCD Monitor).

If LARGE INDICATORS MODE is assigned to a function button, the button can be used to toggle LARGE INDICATORS MODE on (ON) and off (OFF) (aFunction Controls).

LARGE INDICATORS DISP. SETTING

Choose the indicators displayed when ON is selected for DSCREEN SET-UP > LARGE INDICATORS MODE(EVF) or LARGE INDICATORS MODE(LCD).

Option Description

AExpo. DISP.

Choose the items listed at the bottom of the display. Selected items are indicated by check marks (R); to deselect, highlight the check marks and press MENU/OK.

Bd Scale

Select ON to display the exposure indicator.

CL1, L2, L3, L4

Choose up to four large icons for display on the left side of the screen.

DR1, R2, R3, R4

Choose up to four large icons for display on the right side of the screen.

INFORMATION CONTRAST ADJ.

Adjust display contrast.

Option Description
HIGH CONTRAST High contrast.
STANDARD Normal contrast.
LOW CONTRAST Low contrast.
DARK AMBIENT LIGHTING Contrast adjusted for dim ambient lighting.

LOCATION INFO

Select ON to display location info downloaded from a smartphone.

Options
ON OFF

SUB MONITOR SETTING

Choose the indicators displayed in the secondary LCD monitor. Separate displays are available for still photography and movie recording. Choose from the following:

Option Description
INFORMATION Display camera settings. You can choose the settings displayed.
DIALS Display dials showing ISO sensitivity and shutter speed.
HISTOGRAM Display a histogram.

You can switch between displays by pressing the secondary LCD monitor mode button.

The INFORMATION Display

Follow the steps below to choose the indicators shown in the INFORMATION display.

  1. Select DSCREEN SET-UP > SUB MONITOR SETTING in the setup menu.

  2. Highlight STILL MODE or MOVIE MODE and press MENU/OK.

  3. Highlight INFORMATION and press MENU/OK.

  4. Highlight the indicator you wish to change and press MENU/OK.

  5. Highlight the indicator you wish to display and press MENU/OK.

    Still Photography Mode

    Choose from:

    • SHUTTER SPEED
    • APERTURE
    • EXPO. COMP.
    • ISO
    • SHOOTING MODE
    • PHOTOMETRY
    • DRIVE MODE
    • FOCUS MODE
    • WHITE BALANCE
    • IMAGE SIZE
    • IMAGE QUALITY
    • SHUTTER TYPE
    • FILM SIMULATION
    • DYNAMIC RANGE
    • 35mm FORMAT MODE
    • BOOST MODE
    • DUAL IS MODE
    • SELF-TIMER
    • COMMUNICATION STATUS
    • NONE

    Movie Mode

    Choose from:

    • TIME CODE
    • REMAINING TIME/REC. TIME
    • REMAINING TIME
    • REC. TIME
    • SHUTTER SPEED
    • APERTURE
    • EXPO. COMP.
    • ISO
    • SHOOTING MODE
    • PHOTOMETRY
    • FOCUS MODE
    • WHITE BALANCE
    • FILM SIMULATION
    • DYNAMIC RANGE
    • IMAGE FORMAT
    • BOOST MODE
    • DUAL IS MODE
    • SELF-TIMER
    • COMMUNICATION STATUS
    • NONE
  6. Repeat Steps 4 and 5 to change additional indicators.

The dScale indicator can only be enabled or disabled.

dScale

SUB MONITOR BACKGROUND COLOR

Adjusting the background color of the secondary LCD monitor according to lighting conditions makes the display easier to read.

Option Description
BLACK Recommended for use with dark ambient lighting.
WHITE Recommended for use with bright ambient lighting.

The background is displayed in white when the secondary LCD monitor backlight is on.

xQ MENU BACKGROUND

Choose the background color used for the quick menu when it is displayed during still photography.

Options
TRANSPARENT BLACK

FQ MENU BACKGROUND

Choose the background color used for the quick menu when it is displayed during movie recording.

Options
TRANSPARENT BLACK