.Accessories from Fujifilm
The following accessories are available from Fujifilm. For the latest information on the accessories available in your region, check with your local Fujifilm representative or visit “COMPATIBILITY (Accessories)”.
- Rechargeable Li-ion batteries
- NP-W126S: Additional high-capacity NP-W126S rechargeable batteries can be purchased as required.
- Battery chargers
- BC-W126S: Replacement battery chargers can be purchased as required. At +20 °C/+68 °F, the BC-W126S charges an NP-W126S in about 150 minutes.
- Remote releases
- RR-100: Use to reduce camera shake or keep the shutter open during a time exposure (φ2.5 mm).
- Stereo microphones
- MIC-ST1: An external microphone for movie recording.
- Shoe-mounted flash units
- EF-X500: In addition to manual and TTL flash control, this clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the flash sync speed. Featuring support for the optional EF-BP1 battery pack and Fujifilm optical wireless flash control, it can be used as a commander or remote flash unit for remote wireless flash photography.
- EF-BP1: A battery pack for EF-X500 flash units. Takes up to 8 AA batteries.
- EF-60: In addition to manual and TTL flash control, this clip-on flash unit has a Guide Number of 60/197 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the flash sync speed. It can also be used as remote flash under the control of an optional EF-W1 wireless commander.
- EF-W1: With support for the NAS * wireless communication standard developed by Nissin Japan, this wireless flash commander can be used with optional EF-60 clip-on flash units and other NAS-compliant units.
* NAS is a registered trademark of Nissin Japan Ltd. - EF-42: This clip-on flash unit has a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL flash control.
- EF-X20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and supports manual and TTL flash control.
- EF-20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and supports TTL flash control (manual flash control is not supported).
- Tripod grips
- TG‑BT1: Record movies or take photographs while holding this Bluetooth tripod grip.
- Leather cases
- LC-X100V: This leather case comes with a shoulder strap made of the same material. Pictures can be taken and batteries and memory cards inserted or removed with the camera still in its case.
- Grip belts
- GB-001: Improves grip.
- Conversion lenses
- TCL-X100 II: Increases the focal length of the camera lens.
- WCL-X100 II: Reduces the focal length of the camera lens and increases its angle of view.
- Adapter rings
- AR-X100: An aluminum adapter ring used when attaching the LH-X100 lens hood or ⌀49 mm filters available from third-party suppliers.
- Lens hoods
- LH-X100: This aluminum lens hood comes with an AR-X100 adapter ring made of the same material. The adapter ring is required when attaching the hood.
- Protective filters
- PRF-49/PRF-49S: A filter used to protect the lenses of X100-series cameras (requires the AR-X100 adapter ring).
- instax SHARE printers
- SP-1/SP-2/SP-3: Connect via wireless LAN to print pictures on instax film.
