Enter a search term and click .

This section describes how to take pictures using program AE (mode [P]). See “[P], [S], [A], and [M] Modes” for information on [S], [A], and [M] modes.

  1. Press the [DRIVE/DELETE] button and select [STILL IMAGE] in the drive-mode menu.

  2. Adjust settings for program AE.

    Setting
    A Shutter speed [A] (auto) (a[P], [S], [A], and [M] Modes)
    B Sensitivity [A] (auto) (aSensitivity)
    C Aperture [A] (auto) (a[P], [S], [A], and [M] Modes)
    D Focus mode [S] (single AF) (aFocus Mode)
  3. Confirm that [P] appears in the display.

  4. Ready the camera.

    • Hold the camera steady with both hands and brace your elbows against your sides. Shaking or unsteady hands can blur your shots.

    • To prevent pictures that are out of focus or too dark (underexposed), keep your fingers and other objects away from the lens and AF-assist illuminator.

  5. Frame the picture.

    The bright frame in the OVF shows the area that will appear in the final photograph.

  6. Focus.

    Press the shutter button halfway to set focus and exposure.

    Focus frame

    Focus indicator

    • If the camera is able to focus, the focus frame and focus indicator will glow green.
    • If the camera is unable to focus, the focus frame will turn red, s will be displayed, and the focus indicator will blink white.

    If the subject is poorly lit, the AF-assist illuminator may light to assist the focus operation.

    Focus and exposure will lock when the shutter button is pressed halfway. Focus and exposure remain locked while the button is kept in this position (AF/AE lock).

    The camera will focus on subjects at any distance in the macro and standard focus ranges for the lens.

  7. Shoot.

    Smoothly press the shutter button the rest of the way down to take the picture.