Enter a search term and click .

Adjust the camera's sensitivity to light.


Sensitivity can be set by lifting and rotating the sensitivity dial.

Sensitivity

Option Description
[A] (auto) Sensitivity is automatically adjusted in response to shooting conditions according to option chosen for A[SHOOTING SETTING] > [ISO AUTO SETTING]. Choose from [AUTO1], [AUTO2], and [AUTO3].
[C] (command) Rotate the front command dial to choose from values of from 64 to 51200. This range includes “extended” values of 64 to 100, 25600, and 51200. Note that “extended” values may reduce dynamic range or increase mottling.
125–12800 Adjust sensitivity manually. Selected value is shown in display.

Adjusting Sensitivity

High values can be used to reduce blur when lighting is poor, while lower values allow slower shutter speeds or wider apertures in bright light; note, however, that mottling may appear in pictures taken at high sensitivities.

Auto Sensitivity ([A])

Use A[SHOOTING SETTING] > [ISO AUTO SETTING] to choose the base sensitivity, maximum sensitivity, and minimum shutter speed for the [A] position on the sensitivity dial. Settings for [AUTO1], [AUTO2], and [AUTO3] can be stored separately; the defaults are shown below.

Options

Item Options
[DEFAULT SENSITIVITY] 125–12800
[MAX. SENSITIVITY] 400–12800
[MIN. SHUTTER SPEED] 1/2000–30 SEC, [AUTO]

Default

Item [AUTO1] [AUTO2] [AUTO3]
[DEFAULT SENSITIVITY] 125
[MAX. SENSITIVITY] 800 3200 12800
[MIN. SHUTTER SPEED] [AUTO]

The camera automatically chooses a sensitivity between the default and maximum values; sensitivity is only raised above the default value if the shutter speed required for optimal exposure would be slower than the value selected for [MIN. SHUTTER SPEED].

If the value selected for [DEFAULT SENSITIVITY] is higher than that selected for [MAX. SENSITIVITY], [DEFAULT SENSITIVITY] will be set to the value selected for [MAX. SENSITIVITY].

The camera may select shutter speeds slower than [MIN. SHUTTER SPEED] if pictures would still be underexposed at the value selected for [MAX. SENSITIVITY].

If [AUTO] is selected for [MIN. SHUTTER SPEED], the camera will choose the minimum shutter speed automatically. The minimum shutter speed is not affected by the option selected for image stabilization.