Enter a search term and click .

[FLASH SETTING] (Still Photography)

Adjust flash-related settings for still photography.

To display flash settings, press [MENU/OK] in the photo shooting display and select the F ([FLASH SETTING]) tab.

[FLASH FUNCTION SETTING]

Choose a flash control mode, flash mode, or sync mode or adjust the flash level. The options available vary with the flash.

For more information on flash settings, see “External Flash Units” in “Peripherals and Optional Accessories”.

[RED EYE REMOVAL]

Remove red-eye effects caused by the flash.

Option Description
[FLASH] Flash red-eye reduction only.
[OFF] Flash red-eye reduction and digital red-eye removal off.

Flash red-eye reduction can be used in TTL flash control mode.

[TTL-LOCK MODE]

Instead of adjusting flash level with each shot, TTL flash control can be locked for consistent results across a series of photographs.

Option Description
[LOCK WITH LAST FLASH] Flash output is locked at the value metered for the most recent photo.
[LOCK WITH METERING FLASH] The camera emits a series of pre-flashes and locks flash output at the metered value.

To use TTL lock, assign [TTL-LOCK] to a camera control and then use the control to enable or disable TTL lock (aFunction Controls).

Flash compensation can be adjusted while TTL lock is in effect.

Selecting [LOCK WITH LAST FLASH] displays an error message if no previously metered value exists.

[LED LIGHT SETTING]

Choose whether to use the flash unit’s LED video light (if available) as a catchlight or AF-assist illuminator when taking photos. This setting can be configured when a shoe-mounted flash unit mounted with an LED light is being used.

Option Role of LED video light in still photography
[CATCHLIGHT] Catchlight
[AF ASSIST] AF-assist illuminator
[AF ASSIST+CATCHLIGHT] AF-assist illuminator and catchlight
[OFF] None

In some cases, this option can also be accessed via the [FLASH FUNCTION SETTING] menu.

[COMMANDER SETTING]

Choose groups when using the camera flash unit as a commander for Fujifilm optical wireless remote flash control. This option is available when the camera is used with clip-on flash units that support Fujifilm optical wireless flash control.

Options
[Gr A] [Gr B] [Gr C] [OFF]

In some cases, this option can also be accessed via the [FLASH FUNCTION SETTING] menu.

[CH SETTING]

Choose the channel used for communication between the commander and remote flash units. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity.

Options
[CH1] [CH2] [CH3] [CH4]

[Built-In Flash]

Enable or disable the built-in flash.

Option Description
[ON] Enable the built-in flash.
[OFF] Disable the built-in flash. Choose this option when using optional flash units mounted on the camera hot shoe or connected via sync cable.