.[POWER MANAGEMENT]
Adjust power management settings.
To access power management settings, press [MENU/OK], select the D ([SET UP]) tab, and choose [POWER MANAGEMENT].
[AUTO POWER OFF]
Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if [OFF] is selected, the camera must be turned off manually.
| Options | |||||
|---|---|---|---|---|---|
| [5 MIN] | [2 MIN] | [1 MIN] | [30 SEC] | [15 SEC] | [OFF] |
[PERFORMANCE]
Select [BOOST] to improve focus and viewfinder display performance.
| Option | Description |
|---|---|
| [BOOST] | Boost camera focus and viewfinder display performance. The battery drains faster than when is [NORMAL] selected. |
| [NORMAL] | Choose for standard focus and viewfinder display performance and battery endurance. |
| [ECONOMY] | Limit autofocus and viewfinder performance. This option offers better battery endurance than does [NORMAL]. |
[EVF/LCD BOOST SETTING]
Adjust the behavior of the EVF and LCD monitor when [BOOST] is selected for [PERFORMANCE].
| Option | Description |
|---|---|
| [EVF/LCD LOW LIGHT PRIORITY] | Display brightness is adjusted to make subjects in shadows easier to see. Motion blur may cause ghosting. |
| [EVF/LCD RESOLUTION PRIORITY] | Display resolution is increased to make details easier to see. |
| [EVF FRAME RATE PRIORITY (100P)] | The refresh rate for the EVF is increased, smoothing motion. |
[AUTO POWER OFF TEMP.]
If its temperature rises beyond a certain point, the camera will first display a message and then, if the temperature rise continues, automatically end shooting and power down. Choose the temperature at which the camera turns off automatically.
| Option | Description |
|---|---|
| [STANDARD] | The camera turns off automatically when its temperature reaches the [STANDARD] value. |
| [HIGH] | Shooting can continue at temperatures higher than the [STANDARD] value, extending the time available to record movies and the like. ecause remaining in contact with the camera at these high temperatures could result in low-temperature burns, this option should only be used after mounting the camera on a tripod or taking other steps to avoid prolonged contact with the camera. |
