Enter a search term and click .

Adjust settings for connection to other devices.


To access connection settings, press MENU/OK, select the D (SET UP) tab, and choose CONNECTION SETTING.

For more information on wireless connections, visit:

aConnecting to Smartphones and Computers

Bluetooth SETTINGS

Adjust Bluetooth settings.

PAIRING REGISTRATION

Pair the camera with a smartphone running the FUJIFILM Camera Remote app.

SELECT PAIRING DESTINATION

Choose a connection from a list of devices with which the camera has been paired using PAIRING REGISTRATION. Select NO CONNECTION to exit without connecting.

DELETE PAIRING REG.

Delete pairing information for selected devices. Choose the device in the device list. The selected device will also be removed from the devices listed in SELECT PAIRING DESTINATION.

Bluetooth ON/OFF

Option Description
ON The camera automatically establishes a Bluetooth connection with paired devices when turned on.
OFF The camera does not connect via Bluetooth.

AUTO IMAGE TRANSFER

Option Description
ON Mark photos for upload as they are taken. Mark JPEG photos for upload as they are taken.
OFF Photos are not marked for upload as they are taken.

SMARTPHONE SYNC. SETTING

Choose whether to synchronize the camera to the time and/or location provided by a paired smartphone.

Option Description
LOCATION&TIME Synchronize the time and location.
LOCATION Synchronize the location.
TIME Synchronize the time.
OFF Synchronization off.

Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet before pairing the device with your camera or uploading images.

When ON is selected for both Bluetooth ON/OFF and AUTO IMAGE TRANSFER or images are currently selected for upload using the IMAGE TRANSFER ORDER option in the C (playback) menu, upload to paired devices will begin shortly after you exit to playback or turn the camera off. IMAGE TRANSFER ORDER can also be used to select pictures for upload when AUTO IMAGE TRANSFER is off.

NETWORK SETTING

Adjust settings for connection to wireless networks.

WIRELESS ACCESS POINT SETTING

Option Description
SIMPLE SETUP Connect to an access point using simple settings.
MANUAL SETUP Manually adjust settings for connection to a wireless network. Choose the network from a list (SELECT FROM NETWORK LIST) or enter the name manually (ENTER SSID).

WIRELESS IP ADDRESS SETTING

Option Description
AUTO The IP address is assigned automatically.
MANUAL Assign an IP address manually. Manually choose the IP address (IP ADDRESS), network mask (NETMASK), and gateway address (GATEWAY ADDRESS).

PC AUTO SAVE

Adjust settings for connection to computers via wireless LAN.

PC AUTO SAVE SETTING

Choose the method used for connection to computers via a wireless LAN.

Option Description
SIMPLE SETUP Connect using WPS.
MANUAL SETUP Choose the network from a list (SELECT FROM NETWORK LIST) or enter the name manually (ENTER SSID).

DELETE REGISTERED DESTINATION PC

Remove selected destinations.

DETAILS OF PREVIOUS CONNECTION

View computers to which the camera has recently connected.

These settings also apply when pictures are downloaded to a computer using “FUJIFILM PC AutoSave” software.

instax PRINTER CONNECTION SETTING

Adjust settings for connection to optional Fujifilm printers in the instax Link and instax SHARE series.

instax Link Series Printers

  1. Select DCONNECT SETTING > instax PRINTER SETTING > instax PRINTER CONNECTION SETTING, then highlight instax Bluetooth CONNECTION and press MENU/OK.

    Before connecting to an instax mini Link printer, confirm that printer firmware is version “0104” or later. You can view the firmware version and update the printer firmware from the instax mini Link app. For more information, see “Q. I want to update to the latest firmware.” at the link below.

    aFAQ

  2. Highlight PAIRING REGISTRATION, press MENU/OK, and then turn on the printer to initiate pairing.

    To delete pairing data for printers with which the camera is currently paired, select DELETE PAIRING REG.

    To view data for printers with which the camera is currently paired, select PAIRING INFORMATION.

  3. To complete the pairing process, press MENU/OK in the pairing display.

instax SHARE Series Printers

Select DCONNECTION SETTING > instax PRINTER SETTING > instax PRINTER CONNECTION SETTING, then highlight instax Wi-Fi CONNECTION, press MENU/OK, and enter the printer SSID and password.

The Printer Name (SSID) and Password

The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.

CONNECTION MODE

Adjust settings for connection to external devices.

Option Description
USB CARD READER Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. The camera functions normally when not connected.
USB TETHER SHOOTING AUTO

The camera can be controlled from computers, gimbals, drones, or other devices connected via USB. The camera automatically enters “tethered shooting” (i.e., remote-control) mode when the external device is turned on and returns to normal operation when the external device turned off or disconnected.

  • Photographs can be taken remotely and automatically downloaded to computers running Capture One, Adobe® Photoshop® Lightroom® + Tether Plugin, or FUJIFILM X Acquire. FUJIFILM X Acquire can also be used to save and load camera settings.
  • The camera can be used as a webcam when connected to a computer running FUJIFILM X Webcam.
  • Remote photography and movie recording are available when the camera is connected to a compatible device such as a gimbal or drone. Use camera controls to switch between still photography and movie recording. The features available vary with the device connected.
USB TETHER SHOOTING FIXED As for USB TETHER SHOOTING AUTO, except that the camera remains in “tethered shooting” (remote-control) mode when the external device is off or not connected, allowing the device to resume control when the connection is re-established after an accidental disconnection or other disruption. At default settings, pictures are not recorded to the memory card.
WIRELESS TETHER SHOOTING FIXED Choose this option for wireless remote photography. Select a network using DCONNECTION SETTING > NETWORK SETTING.
USB RAW CONV./BACKUP RESTORE

Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected.

  • USB RAW CONV. (requires FUJIFILM X RAW STUDIO): Use the camera's image processing engine to rapidly convert RAW files to high-quality JPEG images.
  • BACKUP RESTORE (requires FUJIFILM X Acquire): Save and load camera settings. Reconfigure the camera in an instant or share settings with other cameras of the same type.

DPOWER MANAGEMENT > AUTO POWER OFF settings also apply during tethered shooting. To prevent the camera turning off automatically, select OFF for AUTO POWER OFF.

USB POWER SUPPLY SETTING

Choose whether power is supplied to the camera when it is connected to a computer or other device via a USB cable.

Option Description
ON The camera draws power from the connected device, reducing the drain on the camera battery.
OFF The camera does not draw power from the connected device.

The camera cannot draw power from Lightning connections or from devices that do not supply power. Select OFF before connecting the camera to such devices. The connection may not be available for data transfer or the like when ON is selected.

Regardless of the option selected, the battery will charge while the camera is off.

GENERAL SETTINGS

Adjust settings for connection to wireless networks.

NAME

Choose a name (NAME) to identify the camera on the wireless network (the camera is assigned a unique name by default).

RESIZE IMAGE FOR SMARTPHONEH

Choose whether to resize images for upload to smartphones. Resizing applies only to the copy uploaded to the smartphone; the original is not affected.

Option Description
ON Larger images are resized to H for upload.
OFF Images are uploaded at their original size.

GEOTAGGING

Choose whether location data downloaded from a smartphone are embedded in pictures as they are taken.

Options
ON OFF

LOCATION INFO

Display the location data last downloaded from a smartphone.

Options
ON OFF

rBUTTON SETTING

Choose the role played by the ISO button during playback.

Option Description
rPAIRING/TRANSFER ORDER The ISO button can be used for pairing and selecting images for transfer during playback.
rWIRELESS COMMUNICATION The ISO button can be used during playback to establish wireless connections.

INFORMATION

View the camera’s MAC, Bluetooth, and wireless network IP address.

RESET WIRELESS SETTING

Restore wireless settings to their default values.