Touch Screen Mode

The LCD monitor also functions as a touch screen.

Shooting Touch Controls
Playback Touch Controls

Shooting Touch Controls

To enable touch controls, select ON for DBUTTON/DIAL SETTING > TOUCH SCREEN SETTING > xTOUCH SCREEN SETTING.

EVF

The LCD monitor can be used to select the focus area while pictures are being framed in the electronic viewfinder (EVF). Use DBUTTON/DIAL SETTING > TOUCH SCREEN SETTING > EVF TOUCH SCREEN AREA SETTINGS to choose the area of the monitor employed for touch controls.

You can choose the type of subject on which the camera preferentially focuses when SUBJECT DETECTION ON is selected for GAF/MF SETTING > SUBJECT DETECTION SETTING.

LCD Monitor

The operation performed can be selected by tapping the touch screen mode indicator in the display. Touch controls can be used for the following operations:

Mode	Description
	AF AF OFF	In focus mode S (AF-S), the camera focuses when you tap your subject in the display. Focus locks at the current distance until you tap the AF OFF icon. In focus mode C (AF-C), the camera initiates focus when you tap your subject display. The camera will continue to adjust focus for changes in the distance to the subject until you tap the AF OFF icon. In manual focus mode (MF), you can tap the display to focus on the selected subject using autofocus.
	AREA	Tap to select a point for focus or zoom. The focus frame will move to the selected point.
	OFF	Touch screen mode off.

Mode

Description

AF OFF

In focus mode S (AF-S), the camera focuses when you tap your subject in the display. Focus locks at the current distance until you tap the AF OFF icon.
In focus mode C (AF-C), the camera initiates focus when you tap your subject display. The camera will continue to adjust focus for changes in the distance to the subject until you tap the AF OFF icon.
In manual focus mode (MF), you can tap the display to focus on the selected subject using autofocus.

AREA

Tap to select a point for focus or zoom. The focus frame will move to the selected point.

OFF

Touch screen mode off.

The behavior of the touch screen varies with the AF mode.

Different touch controls are used during focus zoom (aTouch Controls for Focus Zoom).

To disable touch controls and hide the touch screen mode indicator, select OFF for DBUTTON/DIAL SETTING > TOUCH SCREEN SETTING > xTOUCH SCREEN SETTING.

Touch control settings can be adjusted using GAF/MF SETTING > TOUCH SCREEN MODE. For information on the touch controls available during movie recording, see “FTOUCH SCREEN MODE”.

MOVIE OPTIMIZED CONTROLoL

Selecting ON for BMOVIE SETTING > MOVIE OPTIMIZED CONTROLoL or tapping the movie-optimized mode button in the shooting display optimizes the command dials and touch controls for movie recording. This can be used to prevent camera sounds being recorded with movie footage.

Movie-optimized mode button

SHUTTER SPEED
APERTURE
EXPOSURE COMPENSATION
FISO
INTERNAL MIC LEVEL ADJUSTMENT/
EXTERNAL MIC LEVEL ADJUSTMENT

WIND FILTER
HEADPHONES VOLUME
FFILM SIMULATION
FWHITE BALANCE
FIS MODE
FIS MODE BOOST

Enabling movie-optimized controls disables the aperture ring.

When movie-optimized control is enabled, the movie-optimized mode button can be used to change shooting settings or disable movie-optimized control.

EXTERNAL MIC LEVEL ADJUSTMENT can be set only when an external mic is connected.

Touch Function

Functions can be assigned to the following flick gestures in much the same way as function buttons (aTouch-Function Gestures):

Flick up:T-Fn1
Flick left: T-Fn2
Flick right: T-Fn3
Flick down: T-Fn4

In some cases, touch-function flick gestures display a menu; tap to select the desired option.

Touch-function gestures are disabled by default. To enable touch-function gestures, select ON for DBUTTON/DIAL SETTING > TOUCH SCREEN SETTING > cTOUCH FUNCTION.

Playback Touch Controls

When ON is selected for DBUTTON/DIAL SETTING > TOUCH SCREEN SETTING > aTOUCH SCREEN SETTING, touch controls can be used for the following playback operations: