Exposure can be altered from the value suggested by the camera by rotating the auto mode selector lever to and setting both shutter speed and aperture to values other than [A].
[M] will appear in the display.
The manual exposure display includes an exposure indicator that shows the amount the picture would be under- or over-exposed at current settings.
At settings other than [180X], shutter speed can also be adjusted in increments of 1/3 EV by rotating the front command dial.
To preview exposure in the LCD monitor, select [ON] for [SCREEN SET-UP] > [PREVIEW EXP. IN MANUAL MODE].
Select [OFF] when using the flash or on other occasions on which exposure may change when the picture is taken.