Enter a search term and click .

Make changes to display settings.


To access display settings, press [MENU/OK], select the D ([SET UP]) tab, and choose [SCREEN SET-UP].


[VIEW MODE SETTING]

Adjust settings for eye sensor, EVF (electronic viewfinder), or LCD monitor view modes (aChoosing a Display Mode).

[EVF BRIGHTNESS]

Adjust the brightness of the display in the electronic viewfinder.

Option Description
[AUTO] The camera automatically adjusts brightness around a selected level in response to changes in ambient lighting conditions.
[MANUAL] Adjust brightness manually; choose from options between −7 and +5.

[EVF COLOR]

Adjust the saturation of the display in the electronic viewfinder.

Options
[-5] [-4] [-3] [-2] [-1] [0] [+1] [+2] [+3] [+4] [+5]

[EVF COLOR ADJUSTMENT]

Adjust the color of the display in the electronic viewfinder.

  1. Adjust colors using the focus stick (focus lever).

  2. Press [MENU/OK].

[LCD BRIGHTNESS]

Adjust monitor brightness.

Options
[-5] [-4] [-3] [-2] [-1] [0] [+1] [+2] [+3] [+4] [+5]

[LCD COLOR]

Adjust monitor saturation.

Options
[-5] [-4] [-3] [-2] [-1] [0] [+1] [+2] [+3] [+4] [+5]

[LCD COLOR ADJUSTMENT]

Adjust the color of the display in the LCD monitor.

  1. Adjust colors using the focus stick (focus lever).

  2. Press [MENU/OK].

[IMAGE DISP.]

Choose how long images are displayed after shooting.

Option Description
[CONTINUOUS] Pictures are displayed until the [MENU/OK] button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the focus stick (focus lever); press again to cancel zoom.
[1.5 SEC]/[0.5 SEC] Pictures are displayed for the selected time or until the shutter button is pressed halfway.
[OFF] Pictures are not displayed after shooting.

Colors may differ slightly from those in the final image.

“Noise” mottling may be visible at high sensitivities.

[AUTOROTATE DISPLAYS]

Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation.

Options
[ON] [OFF]

[PREVIEW EXP./WB IN MANUAL MODE]

Choose whether to enable exposure and/or white balance preview in manual exposure mode.

Option Description
[PREVIEW EXP./WB] Enable exposure and white balance preview.
[PREVIEW WB] Preview white balance only. Choose this option in situations in which exposure is likely to change during shooting, as may be the case when you use a flash during daylight.
[OFF] Disable exposure and white balance preview. Choose this option in situations in which both exposure and white balance are likely to change during shooting, as may be the case when you use a flash with an incandescent monitoring lamp.

[NATURAL LIVE VIEW]

Choose whether the effects of film simulation, white balance, and other settings are visible in the monitor.

Option Description
[ON] The effects of camera settings are not visible in the monitor, but shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible. Colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of monochrome and sepia settings.
[OFF] The effects of film simulation, white balance, and other settings can be previewed in the monitor.

[F-Log VIEW ASSIST]

Select [ON] to display a tone-corrected preview (equivalent to BT.709) when recording or viewing F-log movies.

Options
[ON] [OFF]

[ELECTRONIC LEVEL SETTING]

Adjust settings for use when taking pictures using the virtual horizon display (aVirtual Horizon).

[FRAMING GUIDELINE]

Choose a framing grid for shooting mode.

Option Description Display
F[GRID 9] For “rule of thirds” composition.
G[GRID 24] A six-by-four grid.
H[HD FRAMING] Frame HD pictures in the crop shown by the lines at the top and bottom of the display.

Framing guides are not shown at default settings but can be displayed using D[SCREEN SET-UP] > [DISP. CUSTOM SETTING] (aCustomizing the Standard Display).

[AUTOROTATE PB]

Choose [ON] to automatically rotate “tall” (portrait-orientation) pictures during playback.

Options
[ON] [OFF]

[FOCUS SCALE UNITS]

Choose the units used for the focus distance indicator.

Options
[METERS] [FEET]

[APERTURE UNIT FOR CINEMA LENS]

Choose whether the camera displays aperture as a T-number (used for movie camera lenses) or an f/-number (used for still camera lenses) when an optional FUJINON MKX-series lens is attached. For information on using cinema lenses, see the documentation provided with the lens.

Option Description
[T NUMBER] A measure of lens aperture commonly used by cinematographers. Lens transmittance is taken into account to better calculate exposure.
[F NUMBER] A measure of lens aperture commonly used by photographers. Lens transmittance is assumed to be 100%, meaning that the same aperture may produce different exposures depending on the lens.

[DISP. CUSTOM SETTING]

Choose the items shown in the standard indicator display (aCustomizing the Standard Display).

[LARGE INDICATORS MODE(EVF)]

Select [ON] to display large indicators in the electronic viewfinder. The indicators displayed can be selected using D[SCREEN SET-UP] > [LARGE INDICATORS DISP. SETTING].

[OFF]

[ON]

Some icons are not displayed when [ON] is selected for [LARGE INDICATORS MODE(EVF)] (aThe Electronic Viewfinder).

If [LARGE INDICATORS MODE] is assigned to a function button, the button can be used to toggle [LARGE INDICATORS MODE] on ([ON]) and off ([OFF]) (aFunction Controls).

[LARGE INDICATORS MODE(LCD)]

Select [ON] to display large indicators in the LCD monitor. The indicators displayed can be selected using D[SCREEN SET-UP] > [LARGE INDICATORS DISP. SETTING].

[OFF]

[ON]

Some icons are not displayed when [ON] is selected for [LARGE INDICATORS MODE(LCD)] (aThe LCD Monitor).

If [LARGE INDICATORS MODE] is assigned to a function button, the button can be used to toggle [LARGE INDICATORS MODE] on ([ON]) and off ([OFF]) (aFunction Controls).

[LARGE INDICATORS DISP. SETTING]

Choose the indicators displayed when [ON] is selected for D[SCREEN SET-UP] > [LARGE INDICATORS MODE(EVF)] or [LARGE INDICATORS MODE(LCD)].

Option Description

A[Expo. DISP.]

Choose the items listed at the bottom of the display. Selected items are indicated by check marks (R); to deselect, highlight the check marks and press [MENU/OK].

Bd[Scale]

Select [ON] to display the exposure indicator.

C[L1], [L2], [L3], [L4]

Choose up to four large icons for display on the left side of the screen.

D[R1], [R2], [R3], [R4]

Choose up to four large icons for display on the right side of the screen.

[INFORMATION CONTRAST ADJ.]

Adjust display contrast.

Option Description
[HIGH CONTRAST] High contrast.
[STANDARD] Normal contrast.
[LOW CONTRAST] Low contrast.
[DARK AMBIENT LIGHTING] Contrast adjusted for dim ambient lighting.

[LOCATION INFO]

Select [ON] to display location info downloaded from a smartphone.

Options
[ON] [OFF]

x[Q MENU BACKGROUND]

Choose the background color used for the quick menu when it is displayed during still photography.

Options
[TRANSPARENT] [BLACK]

F[Q MENU BACKGROUND]

Choose the background color used for the quick menu when it is displayed during movie recording.

Options
[TRANSPARENT] [BLACK]