The Setup Menus ([CONNECTION SETTING])
Adjust settings for connection to other devices.
To access connection settings, press [MENU]/[OK], select the D ([SET UP]) tab, and choose [CONNECTION SETTING].
For more information on wireless connections, visit:
- [Bluetooth SETTINGS]
- [NETWORK SETTING]
- [PC AUTO SAVE]
- [instax PRINTER CONNECTION SETTING]
- [PC CONNECTION MODE]
- [USB POWER SUPPLY SETTING]
- [GENERAL SETTINGS]
- [RESET WIRELESS SETTING]
Adjust Bluetooth settings.
|[PAIRING REGISTRATION]||To pair the camera with a smartphone or tablet, select this option, then launch FUJIFILM Camera Remote on the smart device and tap [PAIRING REGISTRATION].|
|[SELECT PAIRING DESTINATION]||Choose a connection from a list of devices with which the camera has been paired using [PAIRING REGISTRATION]. Select [NO CONNECTION] to exit without connecting.|
|[DELETE PAIRING REG.]||Delete pairing information for selected devices. Choose the device in the device list. The selected device will also be removed from the devices listed in [SELECT PAIRING DESTINATION].|
|[AUTO IMAGE TRANSFER]||
|[SMARTPHONE SYNC. SETTING]||
Choose whether to synchronize the camera to the time and/or location provided by a paired smartphone.
Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet before pairing the device with your camera or uploading images.
When [ON] is selected for both [Bluetooth ON/OFF] and [AUTO IMAGE TRANSFER] or images are currently selected for upload using the [IMAGE TRANSFER ORDER] option in the C (playback) menu, upload to paired devices will begin shortly after you exit to playback or turn the camera off. [IMAGE TRANSFER ORDER] can also be used to select pictures for upload when [AUTO IMAGE TRANSFER] is off.
Adjust settings for connection to wireless networks.
|[WIRELESS ACCESS POINT SETTING]||
|[WIRELESS IP ADDRESS SETTING]||
[PC AUTO SAVE]
Adjust settings for connection to computers via wireless LAN.
|[PC AUTO SAVE SETTING]||
Choose the method used for connection to computers via a wireless LAN.
|[DELETE REGISTERED DESTINATION PC]||Remove selected destinations.|
|[DETAILS OF PREVIOUS CONNECTION]||View computers to which the camera has recently connected.|
[instax PRINTER CONNECTION SETTING]
Adjust settings for connection to optional Fujifilm instax SHARE printers.
The Printer Name (SSID) and Password
The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.
[PC CONNECTION MODE]
Adjust settings for connection to a computer.
|[USB CARD READER]||Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. The camera functions normally when not connected.|
|[USB TETHER SHOOTING AUTO]||Connecting the camera to a computer via USB automatically enables tethered shooting mode. You can also use FUJIFILM X Acquire to save and load camera settings, allowing you to reconfigure the camera in an instant or share settings with other cameras of the same type. The camera functions normally when not connected.|
|[USB TETHER SHOOTING FIXED]||The camera functions in tethered shooting mode even when not connected to a computer. At default settings, pictures are not saved to the memory card, but pictures taken while the camera is not connected will be transferred to the computer when it is connected.|
|[WIRELESS TETHER SHOOTING FIXED]||Choose this option for wireless remote photography. Select a network using D[CONNECTION SETTING] > [NETWORK SETTING].|
|[USB RAW CONV./BACKUP RESTORE]||
Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected.
D[POWER MANAGEMENT] > [AUTO POWER OFF] settings also apply during tethered shooting. Select [OFF] to prevent the camera turning off automatically.
Tethered shooting is available with software such as Capture One Pro Fujifilm or Adobe® Photoshop® Lightroom® Classic CC. If you use Adobe® Photoshop® Lightroom® Classic CC, download FUJIFILM Tether Shooting Plug-in from the Adobe Exchange website. FUJIFILM Tether Shooting Plug-in is available free of charge.
FUJIFILM X Acquire also supports tethered shooting using camera controls. FUJIFILM X Acquire can be downloaded free of charge from the Fujifilm website.
[USB POWER SUPPLY SETTING]
Choose whether power is supplied to the camera when it is connected to a computer or other device via a USB cable.
|[ON]||The camera draws power from the connected device, reducing the drain on the camera battery.|
|[OFF]||The camera does not draw power from the connected device.|
The camera cannot draw power from Lightning connections or from devices that do not supply power. Select [OFF] before connecting the camera to such devices. The connection may not be available for data transfer or the like when [ON] is selected.
The term “draw power” is used when the connected device supplies power to the camera.
Regardless of the option chosen, the battery will charge while the camera is off.
Adjust settings for connection to wireless networks.
|[NAME]||Choose a name ([NAME]) to identify the camera on the wireless network (the camera is assigned a unique name by default).|
|[RESIZE IMAGE FOR SMARTPHONE] H||
Choose whether to resize images for upload to smartphones. Resizing applies only to the copy uploaded to the smartphone; the original is not affected.
|[GEOTAGGING]||Choose whether location data downloaded from a smartphone are embedded in pictures as they are taken.|
|[LOCATION INFO]||Display the location data last downloaded from a smartphone.|
Choose the role played by function buttons assigned the [WIRELESS COMMUNICATION] function.
View the camera’s MAC and Bluetooth address.
[RESET WIRELESS SETTING]
Restore wireless settings to their default values.