Adjust power management settings.
To access power management settings, press [MENU/OK], select the D ([SET UP]) tab, and choose [POWER MANAGEMENT].
[AUTO POWER OFF]
Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if [OFF] is selected, the camera must be turned off manually.
|[5 MIN]||[2 MIN]||[1 MIN]||[30 SEC]||[15 SEC]||[OFF]|
Select [BOOST] to improve focus and EVF display performance.
Boost camera focus and EVF display performance. The battery drains faster than when is [NORMAL] selected. You can choose to assign priority to:
|[AF PRIORITY -
|[AF PRIORITY -
|Focus speed while adjusting EVF and LCD brightness to make objects in shadows easier to see. Some ghosting may be visible with blurred images.|
|[EVF RESOLUTION PRIORITY]||Viewfinder resolution.|
|[EVF FRAME RATE PRIORITY]||Viewfinder frame rate for smoother motion.|
Regardless of the option selected, the camera functions in [AF PRIORITY - NORMAL] mode while the monitor is on.
Choose for standard focus and EVF display performance and battery endurance.
[SHOOTING STAND BY MODE]
Choose the delay before the camera enters shooting standby mode.
|[5 MIN]||The camera will suspend all functions and enter powering-saving (standby) mode if no operations are performed for the selected period. To exit shooting standby mode, press the [MENU/OK] button or another control.|
|[OFF]||Shooting standby mode disabled.|
[AUTO POWER SAVE]
If [ON] is selected, the display frame rate will drop to save power if no operations are performed for a short period, but the normal frame rate can be restored by operating camera controls.