Enter a search term and click .

Access options for camera controls.


To access control options, press [MENU/OK], select the D ([SET UP]) tab, and choose [BUTTON/DIAL SETTING].


[FOCUS LEVER SETTING]

Choose the functions performed by the focus stick (focus lever).

Option Description
[LOCK (OFF)] The focus stick cannot be used during shooting.
[PUSH n TO UNLOCK] Press the stick to view the focus-point display and tilt the stick to select a focus point.
[ON] Tilt the stick to view the focus-point display and select a focus point.

x[EDIT/SAVE QUICK MENU] ()

Choose the items displayed in the quick menu during still photography (aThe Quick Menu).

F[EDIT/SAVE QUICK MENU] ()

Choose the items displayed in the quick menu when filming movies (aThe Quick Menu).

[FUNCTION (Fn) SETTING] ()

Choose the roles played by the function buttons (aFunction Controls).

[COMMAND DIAL SETTING] ()

Choose the roles played by the command dials.

Option Description
[FRONT COMMAND
DIAL 1]
Assign shutter speed ([S.S. (PROGRAM SHIFT)]) or aperture ([APERTURE]* to [FRONT COMMAND DIAL 1].
[FRONT COMMAND
DIAL 2]
Assign shutter speed ([S.S. (PROGRAM SHIFT)]), aperture ([APERTURE]*, sensitivity ([ISO]), or no role ([NONE]) to [FRONT COMMAND DIAL 2] or [FRONT COMMAND DIAL 3].
[FRONT COMMAND
DIAL 3]
[REAR COMMAND DIAL] Assign shutter speed ([S.S. (PROGRAM SHIFT)]), aperture ([APERTURE]*, sensitivity ([ISO]), or no role ([NONE]) to the rear command dial.
[EXP. COMPENSATION ASSIGNMENT] Exposure compensation can be adjusted using either or both of the front and rear command dials while the d (exposure compensation) button is pressed.

* Aperture ring rotated to [A] or [C] in mode [A] (aperture-priority AE) or [M] (manual).

[COMMAND DIAL SETTING] can also be accessed by pressing and holding the center of the front command dial.

You can also press the center of the front command dial to cycle through settings in the order [FRONT COMMAND DIAL 1], [FRONT COMMAND DIAL 2], and [FRONT COMMAND DIAL 3].

The selected option also applies to the vertical-grip command dials.

[COMMAND DIAL DIRECTION] ()

Choose the direction in which the command dials are rotated to choose values. Settings for the front and rear command dials can be adjusted separately.

Option Description
- ––––– + Rotate the dial right for higher values or to move to the next item.
+ ––––– - Rotate the dial left for higher values or to move to the next item.

[SHUTTER AF]

Choose whether the camera focuses when the shutter button is pressed halfway.

[AF-S]

Option Description
[ON] Focus locks when the shutter button is pressed halfway.
[OFF] No focus operation is performed when the shutter button is pressed halfway.

[AF-C]

Option Description
[ON] The camera focuses while the shutter button is pressed halfway.
[OFF] No focus operation is performed when the shutter button is pressed halfway.

[SHUTTER AE]

If [ON] is selected, exposure will lock while the shutter button is pressed halfway. The setting for focus mode [C] (AF-C) can be adjusted separately from that for modes [S] (AF-S) and [M] (manual focus).

Options
[ON] [OFF]

Select [OFF] to allow the camera to adjust exposure before each shot taken in burst mode.

[SHOOT WITHOUT LENS]

Choose [ON] to enable the shutter release when no lens is attached.

Options
[ON] [OFF]

[SHOOT WITHOUT CARD]

Choose whether the shutter can be released without a memory card inserted in the camera.

Option Description
[ON] When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed.
[OFF] The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card.

[FOCUS RING]

Choose the direction in which the focus ring is rotated to increase the focus distance.

Options
X[CW] (clockwise) Y[CCW] (counterclockwise)

[FOCUS RING OPERATION]

Choose how the camera adjusts focus in response to the movement of the focus ring.

Option Description
[NONLINEAR] Focus is adjusted at the same rate as the ring is rotated.
[LINEAR] Focus is adjusted linearly according to the amount the ring is rotated, but the focusing speed is unaffected by the speed the ring is rotated.

[AE/AF-LOCK MODE]

This option determines the behavior of the button to which exposure and/or focus lock is assigned.

Option Description
[AE&AF ON WHEN PRESSING] Exposure and/or focus will lock while the button is pressed.
[AE&AF ON/OFF SWITCH] Exposure and/or focus will lock when the button is pressed and remain locked until it is pressed again.

[AWB-LOCK MODE]

Choose the behavior of function buttons assigned auto white balance (AWB) lock. Auto white balance lock is used to lock white balance at the value metered by the camera when [AUTO] is selected for white balance.

Option Description
[AWB ON WHEN PRESSING] Auto white balance locks while the button is pressed.
[AWB ON/OFF SWITCH] Press the button once to lock auto white balance and again to end the lock.

[EXPO. COMP. BUTTON SETTING]

Control the behavior of the rear command dial and the button to which exposure compensation is assigned. If d [ON WHEN PRESSING] is selected, exposure compensation can be adjusted by holding the button while rotating dial; if d [ON/OFF SWITCH] is selected, exposure compensation can be set by pressing the button once, rotating the dial, and then pressing the button again.

Options
d[ON WHEN PRESSING] d[ON/OFF SWITCH]

[TOUCH SCREEN SETTING]

Enable or disable touch-screen controls.

x[TOUCH SCREEN SETTING]

Option Description
[ON] The LCD monitor functions as a touch screen during shooting.
[OFF] Touch controls disabled.

x[DOUBLE TAP SETTING]

Option Description
[ON] Tap the LCD monitor twice to zoom in on your subject during shooting.
[OFF] Touch zoom disabled.

c[TOUCH FUNCTION]

Option Description
[ON] Enable touch-function gestures.
[OFF] Disable touch-function gestures.

a[TOUCH SCREEN SETTING]

Option Description
[ON] The LCD monitor functions as a touch screen during playback.
[OFF] Touch controls disabled.

[EVF TOUCH SCREEN AREA SETTINGS]

Select the area of the LCD monitor used for touch controls while the viewfinder is active. The area used for touch controls can be selected from:

Option Description
6 All.
0 Right half.
2 Top right quarter.
4 Bottom right quarter.
1 Left half.
3 Top left quarter.
5 Bottom left quarter.
[OFF] Touch controls disabled.

[LOCK] ()

Lock selected controls to prevent unintended operation.

[LOCK SETTING]

Choose from the following:

Option Description
[UNLOCK] Reset lock options.
[ALL FUNCTION] Lock all controls in the [FUNCTION SELECTION] list.
[SELECTED FUNCTION] Lock only the controls selected in the [FUNCTION SELECTION] list.

[FUNCTION SELECTION]

Choose the controls locked when [SELECTED FUNCTION] is chosen for [LOCK SETTING].

The controls selected using [SELECTED FUNCTION] can be locked at any time during shooting by pressing and holding [MENU/OK]. To unlock the controls, press and hold the button again.