This website uses cookies. By using the site you are agreeing to our Privacy Policy.

Enter a search term and click .

Adjust display settings.

[IMAGE DISP.]

Choose how long images are displayed after shooting. Colors may differ slightly from those in the final image and “noise” mottling may be visible at high sensitivities.

[CONTINUOUS]

Pictures are displayed until the [MENU/OK] button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the command dial; press again to cancel zoom.

[1.5 SEC]/[0.5 SEC]
Pictures are displayed for 1.5 seconds ([1.5 SEC]) or 0.5 seconds ([0.5 SEC]) or until the shutter button is pressed halfway.
OFF
Pictures are not displayed after shooting.

[EVF AUTOROTATE DISPLAYS]

Choose whether the indicators in the viewfinder rotate to match camera orientation. Regardless of the option selected, the indicators in the monitor do not rotate.

[PREVIEW EXP. IN MANUAL MODE]

Select [ON] to enable exposure preview in manual exposure mode. Select [OFF] when using a flash or on other occasions on which exposure may change when the picture is taken.

[EVF BRIGHTNESS]

Adjust the brightness of the display in the electronic viewfinder.

[LCD BRIGHTNESS]

Adjust monitor brightness.

[PREVIEW PIC. EFFECT]

Choose [ON] to preview the effects of film simulation, white balance, and other settings in the monitor. Choose [OFF] to make shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible.

If [OFF] is selected, the effects of camera settings will not be visible in the monitor and colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of advanced filters and of monochrome and sepia settings.

[FRAMING GUIDELINE]

Choose the type of framing grid available in shooting mode.

[GRID 9]

For “rule of thirds” composition.

[GRID 24]

A six-by-four grid.

[HD FRAMING]

Frame HD pictures in the crop shown by the lines at the top and bottom of the display.

[AUTOROTATE PB]

Choose [ON] to automatically rotate “tall” (portrait-orientation) pictures during playback.

[FOCUS CHECK]

If [ON] is selected, the camera will automatically zoom in on the view through the lens when the focus ring is rotated in manual focus mode.

[FOCUS SCALE UNITS]

Choose the units used for the focus distance indicator.

[DISP. CUSTOM SETTING]

Choose items for the standard display. Highlight items and press [MENU/OK] or deselect.