Enter a search term and click .

Adjust movie-recording options.


To display options for movie recording, press MENU/OK in the movie shooting display and select the B (MOVIE SETTING) tab.


MOVIE SETTING LIST

View current movie recording settings.

These options can also be viewed by pressing the DISP/BACK button while the movie quick menu is displayed.

MOVIE MODE

Before shooting movies, choose the frame rate and the frame size and aspect ratio.

  1. In the shooting menu, select BMOVIE SETTING, then highlight MOVIE MODE and press MENU/OK.

  2. Press the focus stick (focus lever) up or down to highlight the desired frame size and aspect ratio (A) and press the stick right.

    • Choose J16:9 for 6.2 K movies with an aspect ratio of 16 : 9.
    • Choose T16:9 or W17:9 for high-quality 4 K movies with aspect ratios of 16 or 17 to 9.
    • Choose V16:9 or 117:9 for 4K movies with aspect ratios of 16 or 17 to 9.
    • Choose W16:9 or W17:9 for Full HD movies with aspect ratios of 16 or 17 to 9.
  3. Press the focus stick (focus lever) up or down to highlight a frame rate (B) and press MENU/OK.

    Options
    23.98P 24P 25P 29.97P 50P 59.94P

The choice of frame rates varies with the movie mode.

HIGH SPEED REC

Record high-frame-rate movies. High-frame-rate movies can be played back in slow motion, giving you time to view fast-moving subjects or details too fleeting for the naked eye. Select ON to choose the recording and playback rates separately.

Choose ON HDMI ONLY to record footage only to external recorders connected via HDMI. In this case, a recording frame-rate of 200P or 240P cannot be selected. Also note that the playback frame-rate cannot be set.

Frame Size

Options
W16:9 W17:9

Recording

Options
100P 120P 200P 240P

Playback

Options
23.98P 24P 25P 29.97P 50P 59.94P

High-speed movies are recorded with no sound.

The footage recorded to the memory card is compressed with the goal of maintaining the selected bit rate.

The options available for playback rate vary with the option selected for rate of recording.

FSELF-TIMER

Choose the delay between the shutter button being pressed all the way down and the start of recording.

  • The display shows the number of seconds remaining before recording begins.
  • To stop the timer before recording begins, press DISP/BACK.

Options
3 SEC 5 SEC 10 SEC OFF

MEDIA REC SETTING

Choose movie file settings, including destination, file type, compression, and bit rate.

MEDIA REC SETTING

Choose movie file settings, including destination, file type, and compression.

Destination

Choose save options and save and output destinations for movies.

Option Description
Z Movies are saved solely to the memory card.
U Movies are recorded only to devices connected via HDMI.

File Type and Compression

Choose the movie file type and compression.

Option Description
H.264 420 MOV A highly-portable compressed format. Footage is recorded at a depth of 8 bits using Long GOP interframe compression and 4 : 2 : 0 chroma sub-sampling.
H.264 420 MP4 A format suitable for movies that will be uploaded to the web.
H.265 420 MOV A format with a higher compression ratio than H.264. Footage is recorded at a depth of 10 bits using Long GOP interframe compression and 4 : 2 : 0 chroma sub-sampling.
H.265 422 MOV A format with a higher compression ratio than H.264. Footage is recorded at a depth of 10 bits using Long GOP interframe compression and 4 : 2 : 2 chroma sub-sampling.

4:2:2 chroma sub-sampling is used for footage output to external devices connected via HDMI; H.264 footage is output at a bit depth of 8 bits and footage in other formats at a depth of 10 bits.

Long GOP balances good image quality with high compression. Files are smaller, making it a good choice for longer movies.

The options available for file type and compression vary with the options selected for MOVIE MODE, HIGH SPEED REC, and F-Log/HLG RECORDING.

Bit Rate

Choose the movie bit rate.

Options
50Mbps 100Mbps 200Mbps

The options available for bit rate vary with the settings chosen for high-speed movie recording and compression. The actual bit rate may be slower than the selected value depending on the subject.

HDMI OUTPUT SETTING

Adjust settings for use when the shooting display is output to an HDMI device.

HDMI OUTPUT INFO DISPLAY

If ON is selected, HDMI devices to which the camera is connected will mirror the information in the camera display.

Options
ON OFF

HDMI REC CONTROL

Choose whether the camera sends movie start and stop signals to the HDMI device when the shutter button is pressed to start and stop movie recording.

Options
ON OFF

FIX MOVIE CROP MAGNIFICATION

Fix the movie crop ratio at 1.25∶1. This makes it easier to match crops after changing movie settings.

Options
ON OFF

F-Log/HLG RECORDING

Choose the destination for F‐Log and HLG (Hybrid Log-Gamma) movies shot while the camera is connected to an HDMI device.

Option Description
t The footage is processed using film simulation and both saved to the memory card and output to the HDMI device.
u The footage is recorded to the memory card and output to the HDMI device in F-Log format.
v The footage is recorded to the memory card and output to the HDMI device in F-Log2 format.
w The footage is recorded to the memory card and output to the HDMI device in HLG format.

F-Log and FLog2 offer gentle gamma curves with wide gamuts suitable for further processing post-production. Sensitivity is restricted to values between ISO 500 and ISO 12800 (F-Log or between ISO 1000 and ISO 12800 (FLog2).

The HLG (Hybrid Log-Gamma) recording format conforms to the international ITU-R BT2100 standard. When viewed on HLG-compatible displays, high-quality HLG footage faithfully captures high-contrast scenes and vivid colors. Sensitivity is restricted to values between ISO 800 and ISO 12800.

Film simulation (P) footage is recorded using the option selected for HIMAGE QUALITY SETTING > FFILM SIMULATION in the shooting menu.

DATA LEVEL SETTING

Choose a signal range for movie recording.

Option Description
VIDEO RANGE The signal range for 8-bit movies is limited to 16–235 and that for 10-bit movies to 64–940.
FULL RANGE The signal ranges for 8-bit and 10-bit movies are respectively 0–255 and 0–1023.

FPHOTOMETRY

Options are the same as those for still photography, but settings must be adjusted separately (aMetering).

FFLICKERLESS S.S. SETTING

Options are the same as those for still photography, but settings must be adjusted separately (aFLICKERLESS S.S. SETTING (Still Photography)).

Options
ON OFF

FIS MODE

Choose the image stabilization mode.

Option Description
IBIS Enable in-body image stabilization (IBIS).
IBIS + DIS Enable in-body (IBIS) and digital (DIS) image stabilization. The crop is adjusted according to the option selected for MOVIE MODE. This setting can compensate for more severe camera shake.
OFF Image stabilization off; x appears in the display.

Note that vibration or camera sounds may be noticeable as image stabilization takes effect.

FIS MODE BOOST

Choose the image stabilization level.

Option Description
ON Suitable for shots with no panning.
OFF Suitable for shots with panning.

Assigning IS MODE BOOST to a function button allows the image stabilization level to be changed while recording is in progress (aFunction Controls).

ZEBRA SETTING

Highlights that may be overexposed are shown by zebra stripes in the movie mode display.

Option Description
ZEBRA RIGHT Right-slanting stripes.
ZEBRA LEFT Left-slanting stripes.
OFF Stripes off.

ZEBRA LEVEL

Choose the brightness threshold for the zebra stripe display.

Options
50 55 60 65 70 75 80 85 90 95 100

MOVIE OPTIMIZED CONTROLoL

Select ON to allow movie settings to be adjusted using only the command dials and touch-screen controls. You may find this helpful in preventing the sounds of camera controls being recorded with movies (aMOVIE OPTIMIZED CONTROLoL).

Options
ON OFF

FREC FRAME INDICATOR

If ON is selected, the borders of the display will turn red during movie recording.

Options
ON OFF

The borders are displayed in green during high-speed movie recording.

TALLY LIGHT

Choose the lamp (indicator or AF-assist) that lights during movie recording and whether the lamp blinks or remains steady.

Indicator lamp

AF-assist illuminator

Option Description
FRONT OFF
REARz
The indicator lamp lights during movie recording.
FRONT OFF
REARy
The indicator lamp blinks during movie recording.
FRONTz
REARz
The indicator and AF-assist lamps light during movie recording.
FRONTz
REAR OFF
The AF-assist lamp lights during movie recording.
FRONTy
REARy
The indicator and AF-assist lamps blink during movie recording.
FRONTy
REAR OFF
The AF-assist lamp blinks during movie recording.
FRONT OFF
REAR OFF
The indicator and AF-assist lamps remain off during movie recording.

FSELECT CUSTOM SETTING

Options are the same as those for still photography, but settings must be adjusted separately (axSELECT CUSTOM SETTING).

FEDIT/SAVE CUSTOM SETTING

Options are the same as those for still photography, but settings must be adjusted separately (axEDIT/SAVE CUSTOM SETTING).

FAUTO UPDATE CUSTOM SETTING

This item is also found in the photo menus (aAUTO UPDATE CUSTOM SETTING (Still Photography)).

xFCONVERSION LENS

This item is also found in the photo menus (axFCONVERSION LENS (Still Photography)).

xFND FILTER

This item is also found in the photo menus (axFND FILTER (Still Photography)).

xFWIRELESS COMMUNICATION

This item is also found in the photo menus (axFWIRELESS COMMUNICATION (Still Photography)).