The following optional accessories are available from FUJIFILM. For the latest information on the accessories available in your region, check with your local FUJIFILM representative or visit “Digital Cameras”.
Rechargeable Li-ion batteries
NP‑W126/NP‑W126S: Additional high-capacity NP‑W126/NP‑W126S rechargeable batteries can be purchased as required.
Battery chargers
BC‑W126: Replacement battery chargers can be purchased as required. At +20 °C/+68 °F, the BC-W126 charges an NP-W126/NP‑W126S in about 150 minutes.
AC power adapters
AC‑9V (requires CP‑W126 DC coupler): Use this 100–240 V, 50/60 Hz AC power adapter for extended shooting and playback or when copying pictures to a computer.
DC couplers
CP‑W126: Connect the AC‑9V to the camera.
Remote releases
RR‑90: Use to reduce camera shake or keep the shutter open during a time exposure.
Stereo microphones
MIC‑ST1: An external microphone for movie recording.
FUJINON lenses
XF‑series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
XC‑series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
Shoe-mounted flash units
EF‑X500: This clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the flash sync speed. Powered by four AA batteries or an optional BF‑BP1 battery pack, it supports manual and TTL flash control and auto power zoom in the range 24–105 mm (35 mm format equivalent) and features FUJIFILM optical wireless flash control, allowing it to be used as a master or remote flash unit for remote wireless flash photography. The flash head can be rotated 90° up, 10° down, 135° left, or 180° right for bounce lighting.
EF‑20: This clip-on flash unit (powered by two AA batteries) has a Guide Number of 20/65 (ISO 100, m/ft.) and supports TTL flash control (manual flash control is not supported). The flash head can be rotated upwards 90° for bounce lighting.
EF‑42: This clip-on flash unit (powered by four AA batteries) has a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL flash control and auto power zoom in the range 24–105 mm (35 mm format equivalent). The flash head can be rotated 90° up, 180° left, or 120° right for bounce lighting.
EF‑X20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.). Powered by two AAA batteries, this light, compact unit features a dial for adjusting TTL flash compensation or manual flash output.
Vertical power booster grips
VPB‑XT2: This grip accommodates extra batteries for improved endurance and makes it easier to hold the camera rotated 90° to frame pictures in “tall” (portrait) orientation.
Hand grips
MHG‑XT2: Features an improved grip. Batteries and memory cards can be removed with the grip in place, and the grip is equipped with a rail for quick-shoe camera mounts.
Leather cases
BLC‑XT2: This case combines practicality with the luxury of leather and comes with a cloth that can be used to wrap the camera before putting it in the case and on other occasions. Pictures can be taken and batteries inserted or removed with the camera still in its case.
Grip belts
GB‑001: Improves grip. Combine with a hand grip for more secure handling.
Macro extension tubes
MCEX‑11/16: Attach between the camera and the lens to shoot at high reproduction ratios.
Teleconverters
XF1.4X TC WR: Increases the focal length of the compatible lenses by about 1.4×.
XF2X TC WR: Increases the focal length of the compatible lenses by about 2.0×.
Mount adapters
FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses.
Body caps
BCP‑001: Cover the camera lens mount when no lens is attached.
Cover kits
CVR‑XT2: A set of covers for the X‑T2.
instax SHARE printers
SP‑1/SP‑2: Connect via wireless LAN to print pictures on instax film.
.
