Make changes to display settings.
To access display settings, press MENU/OK, select the (SET UP) tab, and choose SCREEN SETTING.
Adjust the brightness of the display in the electronic viewfinder. Select MANUAL to choose from 11 options from +5 (bright) to −5 (dark), or select AUTO for automatic brightness adjustment.
Adjust the hue of the display in the electronic viewfinder. Choose from 11 options between +5 and −5.
Adjust monitor brightness. Choose from 11 options between +5 and −5.
Adjust monitor hue. Choose from 11 options between +5 and −5.
Choose how long images are displayed after shooting. Colors may differ slightly from those in the final image and “noise” mottling may be visible at high sensitivities.
|CONTINUOUS||Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the rear command dial; press again to cancel zoom.|
|1.5 SEC||Pictures are displayed for the selected time or until the shutter button is pressed halfway.|
|OFF||Pictures are not displayed after shooting.|
Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation.
Select PREVIEW EXP./WB to enable exposure and white balance preview in manual exposure mode, or choose PREVIEW WB to preview only white balance. Select OFF when using a flash or on other occasions on which exposure may change when the picture is taken.
|PREVIEW EXP./WB||PREVIEW WB||OFF|
Choose ON to preview the effects of film simulation, white balance, and other settings in the monitor, OFF to make shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible.
If OFF is selected, the effects of camera settings will not be visible in the monitor and colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of advanced filters and of monochrome and sepia settings.
Choose a framing grid for shooting mode.
|GRID 9||GRID 24||HD FRAMING|
|For “rule of thirds” composition.||A six-by-four grid.||Frame HD pictures in the crop shown by the lines at the top and bottom of the display.|
Framing guides are not shown at default settings but can be displayed using SCREEN SETTING > DISP. CUSTOM SETTING (DISP. CUSTOM SETTING).
Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback.
Choose the units used for the focus distance indicator.
Choose the items shown in the standard display.
In shooting mode, press DISP/BACK until standard indicators are displayed.
Press MENU/OK and select SCREEN SETTING > DISP. CUSTOM SETTING in the (SET UP) tab.
Highlight items and press MENU/OK to select or deselect.
|AF DISTANCE INDICATOR|
|MF DISTANCE INDICATOR|
|Expo. Comp. (Digit)|
|Expo. Comp. (Scale)|
|DUAL IS MODE|
|MOVIE MODE & REC. TIME|
|MIC LEVEL ADJUSTMENT|
Press DISP/BACK to save changes.
Press DISP/BACK as needed to exit the menus and return to the shooting display.