Access options for camera controls.
To access control options, press MENU/OK, select the (SET UP) tab, and choose BUTTON/DIAL SETTING.
Choose the functions performed by the focus stick (focus lever).
Option | Description |
---|---|
LOCK (OFF) | The focus stick can not be used during shooting. |
PUSH TO UNLOCK | Press the stick to view the focus-point display and tilt the stick to select a focus point. |
ON | Tilt the stick to view the focus-point display and select a focus point. |
Choose the items displayed in the quick menu.
Select BUTTON/DIAL SETTING > EDIT/SAVE QUICK MENU in the (SET UP) tab.
The current quick menu will be displayed; use the selector to highlight the item you wish to change and press MENU/OK.
Highlight any of the following options and press MENU/OK to assign it to the selected position.
IMAGE SIZE
IMAGE QUALITY
FILM SIMULATION *
GRAIN EFFECT *
DYNAMIC RANGE *
WHITE BALANCE *
HIGHLIGHT TONE *
SHADOW TONE *
COLOR *
SHARPNESS *
NOISE REDUCTION *
SELECT CUSTOM SETTING *
AF MODE
AF-C CUSTOM SETTINGS
FACE/EYE DETECTION SETTING
MF ASSIST
SELF-TIMER
SHUTTER TYPE
FLASH FUNCTION SETTING
FLASH COMPENSATION
MOVIE MODE
MIC LEVEL ADJUSTMENT
EVF/LCD BRIGHTNESS
EVF/LCD COLOR
NONE
* Stored in custom settings bank.
Select NONE to assign no option to the selected position. When SELECT CUSTOM SETTING is selected, current settings are shown in the quick menu by the label BASE.
Highlight the desired item and press MENU/OK to assign it to the selected position.
The quick menu can also be accessed in shooting mode by holding the Q button.
Choose the roles played by the function buttons.
Select BUTTON/DIAL SETTING > Fn/AE‑L/AF‑L BUTTON SETTING in the (SET UP) tab.
Highlight the desired control and press MENU/OK.
Highlight any of the following options and press MENU/OK to assign it to the selected control.
IMAGE SIZE
IMAGE QUALITY
RAW
FILM SIMULATION
GRAIN EFFECT
DYNAMIC RANGE
WHITE BALANCE
SELECT CUSTOM SETTING
FOCUS AREA
AF MODE
AF-C CUSTOM SETTINGS
FACE/EYE DETECTION SETTING
DRIVE SETTING
SELF-TIMER
SHUTTER TYPE
ISO AUTO SETTING
WIRELESS COMMUNICATION
FLASH FUNCTION SETTING
TTL-LOCK
MODELING FLASH
MIC LEVEL ADJUSTMENT
PREVIEW DEPTH OF FIELD
PREVIEW EXP./WB IN MANUAL MODE
PREVIEW PIC. EFFECT
AE LOCK ONLY
AF LOCK ONLY
AE/AF LOCK
AF-ON
APERTURE SETTING
LOCK SETTING
PERFORMANCE
PLAYBACK
NONE (control disabled)
Function button assignment options can also be accessed by holding the DISP/BACK button. The selector can not be assigned more than one role at a time.
If AF‑ON is selected, you can press the control instead of keeping the shutter button pressed halfway.
If MODELING FLASH is selected, you can press the control to test-fire the flash (modeling flash).
If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for FLASH SETTING > TTL-LOCK MODE (TTL-LOCK MODE).
Choose the roles played by the up, down, left, and right buttons on the selector.
Option | Description |
---|---|
Fn BUTTON | The selector buttons serve as function buttons. |
FOCUS AREA | The selector buttons can be used to position the focus area. |
Selecting FOCUS AREA prevents you accessing the functions assigned to the function buttons.
Choose the roles played by the command dials.
Option | Description |
---|---|
F S.S. | The front command dial controls aperture, the rear command dial shutter speed. |
S.S. F | The front command dial controls shutter speed, the rear command dial aperture. |
Select OFF to disable shutter-speed fine-tuning using the command dials.
Options | |
---|---|
ON | OFF |
Choose the ISO sensitivity assigned to the H position on the sensitivity dial.
Options | |
---|---|
25600 | 51200 |
Choose the ISO sensitivity assigned to the L position on the sensitivity dial.
Options | ||
---|---|---|
100 | 125 | 160 |
Choose how sensitivity is adjusted when the sensitivity dial is rotated to A.
Option | Description |
---|---|
AUTO | Sensitivity is automatically adjusted in response to shooting conditions according to option chosen for SHOOTING SETTING > ISO AUTO SETTING. Choose from AUTO 1, AUTO 2, and AUTO 3. |
COMMAND | Sensitivity is adjusted manually by rotating the front command dial. |
Choose whether the camera focuses when the shutter button is pressed halfway.
Option | Description |
---|---|
ON | In focus mode S (AF‑S), the camera focuses when the shutter button is pressed halfway and locks focus while the button remains in this position. In focus mode C (AF‑C), focus is adjusted continually while the button is pressed halfway. |
OFF | The camera does not focus when the shutter button is pressed halfway. |
If ON is selected, exposure will lock while the shutter button is pressed halfway.
Options | |
---|---|
ON | OFF |
Select OFF to allow the camera to adjust exposure before each shot taken in burst mode.
Choose ON to enable the shutter release when no lens is attached.
Options | |
---|---|
ON | OFF |
Choose whether the shutter can be released without a memory card inserted in the camera.
Option | Description |
---|---|
ON | When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed. |
OFF | The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card. |
Choose the direction in which the focus ring is rotated to increase the focus distance.
Options | |
---|---|
CW (clockwise) | CCW (counterclockwise) |
If AE & AF ON WHEN PRESSING is selected, exposure and/or focus will lock while the AE-L or AF-L button is pressed. If AE & AF ON/OFF SWITCH is selected, exposure and/or focus will lock when the AE-L or AF-L button is pressed and remain locked until the button is pressed again.
Options | |
---|---|
AE & AF ON WHEN PRESSING | AE & AF ON/OFF SWITCH |
Choose the method used to adjust aperture when using lenses with no aperture rings.
Option | Description |
---|---|
AUTO+MANUAL | Rotate the front command dial to choose the aperture. Rotate past minimum aperture to choose A (auto). |
AUTO | Aperture is selected automatically; camera functions in exposure mode P (program AE) or S (shutter-priority AE). |
MANUAL | Rotate the front command dial to choose the aperture; camera functions in exposure mode A (aperture-priority AE) or M (manual). |
Lock selected controls to prevent unintended operation.
Option | Description |
---|---|
LOCK SETTING |
Choose from the following: UNLOCK: Reset lock options. ALL FUNCTION: Lock all controls in the FUNCTION SELECTION list. SELECTED FUNCTION: Lock only the controls selected in the FUNCTION SELECTION list. |
FUNCTION SELECTION | Choose the controls locked when SELECTED FUNCTION is chosen for LOCK SETTING. |
The selector and the Q button can be locked at any time by pressing and holding the MENU/OK button.