Enter a search term and click .

Cleaning the Image Sensor

Dust that cannot be removed using DUSER SETTING > SENSOR CLEANING can be removed manually as described below.

Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning.

  1. Use a blower (not a brush) to remove dust from the sensor.

  2. Check whether the dust has been successfully removed.

  3. Replace the body cap or lens.

Do not use a brush or blower brush. Failure to observe this precaution could damage the sensor.

If dust cannot be removed, we recommend asking your Fujifilm dealer to perform a cleaning.