Adjust settings for connection to other devices.
To access connection settings, press MENU/OK, select the D (SET UP) tab, and choose CONNECTION SETTING.
For more information on wireless connections, visit:
Adjust Bluetooth settings.
Pair the camera with a smartphone or tablet to which the smartphone app has been installed.
SELECT PAIRING DESTINATION
Choose a connection from a list of devices with which the camera has been paired using PAIRING REGISTRATION. Select NO CONNECTION to exit without connecting.
DELETE PAIRING REG.
Delete pairing information for selected devices. Choose the device in the device list. The selected device will also be removed from the devices listed in SELECT PAIRING DESTINATION.
|ON||The camera automatically establishes a Bluetooth connection with paired devices when turned on.|
|OFF||The camera does not connect via Bluetooth.|
AUTO IMAGE TRANSFER ORDER
Choose whether pictures are automatically marked for upload as they are taken.
SMARTPHONE LOCATION SYNC.
Choose whether to synchronize the camera to the location provided by a paired smartphone.
Choose a name (NAME) to identify the camera on the wireless network (the camera is assigned a unique name by default).
IMAGE TRANSFER WHILE POWER OFF
Choose whether the camera uploads pictures to paired smartphones while off.
RESIZE IMAGE FOR SMARTPHONE H
Choose whether to resize images for upload to smartphones. Resizing applies only to the copy uploaded to the smartphone; the original is not affected.
|ON||Larger images are resized to H for upload.|
|OFF||Images are uploaded at their original size.|
Be sure your smartphone is running the latest version of the applicable smartphone app. Different operating systems use different apps; for more information, visit:
Pictures will be uploaded during shooting and playback and while the camera is off if ON is selected for both Bluetooth ON/OFF and AUTO IMAGE TRANSFER ORDER or if images are currently selected for upload using the IMAGE TRANSFER ORDER option in the playback menu.
The camera clock will automatically be set to the time reported by paired smartphones whenever the app is launched.
Adjust settings for connection to wireless networks.
WIRELESS ACCESS POINT SETTING
|SIMPLE SETUP||Connect to an access point using simple settings.|
|MANUAL SETUP||Manually adjust settings for connection to a wireless network. Choose the network from a list (SELECT FROM NETWORK LIST) or enter the name manually (ENTER SSID).|
WIRELESS IP ADDRESS SETTING
|AUTO||The IP address is assigned automatically.|
|MANUAL||Assign an IP address manually. Manually choose the IP address (IP ADDRESS), network mask (NETMASK), and gateway address (GATEWAY ADDRESS).|
instax PRINTER CONNECTION SETTING
Adjust settings for connection to optional Fujifilm instax SHARE printers.
The Printer Name (SSID) and Password
The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.
Adjust settings for connection to external devices.
|USB CARD READER||Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. The camera functions normally when not connected.|
|USB TETHER SHOOTING AUTO||
The camera can be controlled from computers, gimbals, drones, or other devices connected via USB. The camera automatically enters “tethered shooting” (i.e., remote-control) mode when the external device is turned on and returns to normal operation when the external device turned off or disconnected.
|USB TETHER SHOOTING FIXED||As for USB TETHER SHOOTING AUTO, except that the camera remains in “tethered shooting” (remote-control) mode when the external device is off or not connected, allowing the device to resume control when the connection is re-established after an accidental disconnection or other disruption. At default settings, pictures are not recorded to the memory card.|
|WIRELESS TETHER SHOOTING FIXED||Choose this option for wireless remote photography. Select a network using DCONNECTION SETTING > NETWORK SETTING.|
|USB RAW CONV./BACKUP RESTORE||
Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected.
DPOWER MANAGEMENT > AUTO POWER OFF settings also apply during tethered shooting. To prevent the camera turning off automatically, select OFF for AUTO POWER OFF.
For information on compatible computer software, see “Software for Use with Your Camera”.
USB POWER SUPPLY SETTING
Choose whether power is supplied to the camera when it is connected to a computer or other device via a USB cable.
|ON||The camera draws power from the connected device, reducing the drain on the camera battery.|
|OFF||The camera does not draw power from the connected device.|
The camera cannot draw power from Lightning connections or from devices that do not supply power. Select OFF before connecting the camera to such devices. The connection may not be available for data transfer or the like when ON is selected.
Regardless of the option selected, the battery will charge while the camera is off.
View the camera's MAC and Bluetooth address.
RESET WIRELESS SETTING
Restore wireless settings to their default values.