Warning Messages and Displays
The following warnings appear in the display.
|Low battery. Charge the battery or insert a fully-charged spare battery.
|j (blinks red)
|Battery exhausted. Charge the battery or insert a fully-charged spare battery.
|s (displayed in red with red focus frame)
|The camera cannot focus. Use focus lock to focus on another subject at the same distance, then recompose the picture.
|Aperture or shutter speed displayed in red
|The subject is too bright or too dark and the picture will be over- or under-exposed. Use the flash for additional lighting when taking photographs of poorly-lit subject.
|Camera malfunction. Turn the camera off and then on again. If the message persists, contact a Fujifilm dealer.
|LENS CONTROL ERROR
|TURN OFF THE CAMERA AND TURN ON AGAIN
|CARD NOT INITIALIZED
|Turn the camera off, remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera on. If the problem persists, contact a Fujifilm dealer.
|The memory card is locked. Unlock the card.
|The memory card is incorrectly formatted. Use the camera to format the card.
|The memory card is full and pictures cannot be recorded. Delete pictures or insert a memory card with more free space.
|FRAME NO. FULL
|The camera has run out of frame numbers (current frame number is 999-9999). Insert a formatted memory card and select RENEW for DSAVE DATA SET-UP > FRAME NO.. Take a picture to reset frame numbering to 100-0001, then select CONTINUOUS for FRAME NO..
|An attempt was made to delete or rotate to a protected picture. Remove protection and try again.
|CAN NOT CROP
|The picture is damaged or was not created with the camera.
|DPOF FILE ERROR
|Print orders can contain no more than 999 pictures. Copy any additional pictures you wish to print to another memory card and create a second print order.
|CAN NOT SET DPOF
|The picture cannot be printed using DPOF.
|FCAN NOT SET DPOF
|Movies cannot be printed using DPOF.
|CAN NOT ROTATE
|The selected picture cannot be rotated.
|FCAN NOT ROTATE
|Movies cannot be rotated.
|Red-eye removal cannot be applied to movies.
|Red-eye removal cannot be applied to pictures created with other devices.
|MISMATCH: 4K MODE AND EXTERNAL MONITOR CHANGE MOVIE MODE
|The movie mode selected with the camera is not compatible with the device to which the camera is connected via HDMI. Try selecting a different movie mode (aMOVIE MODE).
CAMERA IS APPROACHING STANDARD
|The camera is approaching the maximum temperature allowed when STANDARD is selected for AUTO POWER OFF TEMP. and will shortly turn off automatically. Turn the camera off and wait for it to cool.
CAMERA IS APPROACHING HIGH TEMPER-
ATURE LIMIT.DO NOT HOLD CAMERA FOR
LONG PERIODS OF TIME
|The camera is approaching the maximum temperature allowed when HIGH is selected for AUTO POWER OFF TEMP. and will shortly turn off automatically. Remaining in contact with the camera could result in low-temperature burns; mount the camera on a tripod or take other steps to avoid prolonged contact with the camera. The camera will shortly turn off automatically. Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.
HIGH TEMPERATURE LIMIT REACHED
|The camera temperature has reached the cutoff point and the camera is about to turn off automatically. Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.