The Setup Menus ([POWER MANAGEMENT])
Adjust power management settings.
To access power management settings, press [MENU/OK], select the D ([SET UP]) tab, and choose [POWER MANAGEMENT].
[AUTO POWER OFF]
Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if [OFF] is selected, the camera must be turned off manually.
|[5 MIN]||[2 MIN]||[1 MIN]||[30 SEC]||[15 SEC]||[OFF]|
Select [BOOST] to improve focus and viewfinder display performance.
Boost camera focus and viewfinder display performance. The battery drains faster than when is [NORMAL] selected.
|[NORMAL]||Choose for standard focus and viewfinder display performance and battery endurance.|
Choose whether the EVF prioritizes [BRIGHTNESS PRIORITY] or [SMOOTHNESS PRIORITY].
|[BRIGHTNESS PRIORITY]||The EVF display prioritizes brightness. Recommended in most situations.|
|[SMOOTHNESS PRIORITY]||Minimize ghosting in the EVF display. Choose when photographing moving subjects. The brightness of the EVF may drop.|
[SMOOTHNESS PRIORITY] is only available when [BOOST] is selected for [PERFORMANCE].
[AUTO POWER OFF TEMP.] (Available from Firmware Version 1.10)
If its temperature rises beyond a certain point, the camera will first display a message and then, if the temperature rise continues, automatically end shooting and power down. Choose the temperature at which the camera turns off automatically.
|[STANDARD]||The camera turns off automatically when its temperature reaches the [STANDARD] value.|
|[HIGH]||Shooting can continue at temperatures higher than the [STANDARD] value, extending the time available to record movies and the like. Because remaining in contact with the camera at these high temperatures could result in low-temperature burns, this option should only be used after mounting the camera on a tripod or taking other steps to avoid prolonged contact with the camera.|