The Setup Menus ([CONNECTION SETTING])
Adjust settings for connection to other devices.
To access connection settings, press [MENU/OK], select the D ([SET UP]) tab, and choose [CONNECTION SETTING].
For more information on wireless connections, visit:
- [Bluetooth SETTINGS]
- [PC AUTO SAVE]
- [instax PRINTER CONNECTION SETTING]
- [CONNECTION MODE]
- [USB POWER SUPPLY SETTING]
- [GENERAL SETTINGS]
- [INFORMATION]
- [RESET WIRELESS SETTING]
[Bluetooth SETTINGS]
Adjust Bluetooth settings.
Option | Description |
---|---|
[PAIRING REGISTRATION] | To pair the camera with a smartphone or tablet, select this option, then launch FUJIFILM Camera Remote on the smart device and tap [PAIRING REGISTRATION]. |
[SELECT PAIRING DESTINATION] | Choose a connection from a list of devices with which the camera has been paired using [PAIRING REGISTRATION]. Select [NO CONNECTION] to exit without connecting. |
[DELETE PAIRING REG.] | Delete pairing information for selected devices. Choose the device in the device list. The selected device will also be removed from the devices listed in [SELECT PAIRING DESTINATION]. |
[Bluetooth ON/OFF] |
|
[AUTO IMAGE TRANSFER] |
|
[SMARTPHONE SYNC. SETTING] |
Choose whether to synchronize the camera to the time and/or location provided by a paired smartphone.
|
Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet before pairing the device with your camera or uploading images.
When [ON] is selected for both [Bluetooth ON/OFF] and [AUTO IMAGE TRANSFER] or images are currently selected for upload using the [IMAGE TRANSFER ORDER] option in the C (playback) menu, upload to paired devices will begin shortly after you exit to playback or turn the camera off. [IMAGE TRANSFER ORDER] can also be used to select pictures for upload when [AUTO IMAGE TRANSFER] is off.
[PC AUTO SAVE]
Adjust settings for connection to computers via wireless LAN.
Option | Description |
---|---|
[PC AUTO SAVE SETTING] |
Choose the method used for connection to computers via a wireless LAN.
|
[DELETE REGISTERED DESTINATION PC] | Remove selected destinations. |
[DETAILS OF PREVIOUS CONNECTION] | View computers to which the camera has recently connected. |
[instax PRINTER CONNECTION SETTING]
Adjust settings for connection to optional Fujifilm instax SHARE printers.
The Printer Name (SSID) and Password
The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.
[CONNECTION MODE]
Adjust settings for connection to a computer.
Option | Description |
---|---|
[USB CARD READER] | Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. The camera functions normally when not connected. |
[X WEBCAM] | The camera can be used as a webcam when connected to a computer running FUJIFILM X Webcam. |
[USB RAW CONV./BACKUP RESTORE] |
Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected.
|
Visit the websites below to learn more about or download the following computer software:
a Capture One Express Fujifilm
[USB POWER SUPPLY SETTING]
Choose whether power is supplied to the camera when it is connected to a computer or other device via a USB cable.
Option | Description |
---|---|
[ON] | The camera draws power from the connected device, reducing the drain on the camera battery. |
[OFF] | The camera does not draw power from the connected device. |
The camera cannot draw power from Lightning connections or from devices that do not supply power. Select [OFF] before connecting the camera to such devices. The connection may not be available for data transfer or the like when [ON] is selected.
The term “draw power” is used when the connected device supplies power to the camera.
Regardless of the option chosen, the battery will charge while the camera is off.
[GENERAL SETTINGS]
Adjust settings for connection to wireless networks.
Option | Description |
---|---|
[NAME] | Choose a name ([NAME]) to identify the camera on the wireless network (the camera is assigned a unique name by default). |
[RESIZE IMAGE FOR SMARTPHONE]H |
Choose whether to resize images for upload to smartphones. Resizing applies only to the copy uploaded to the smartphone; the original is not affected.
|
[GEOTAGGING] | Choose whether location data downloaded from a smartphone are embedded in pictures as they are taken. |
[LOCATION INFO] | Display the location data last downloaded from a smartphone. |
r[BUTTON SETTING] |
Choose the role played by function buttons assigned the [WIRELESS COMMUNICATION] function.
|
[INFORMATION]
View the camera’s MAC and Bluetooth address.
[RESET WIRELESS SETTING]
Restore wireless settings to their default values.