Enter a search term and click .

Adjust shooting options for still photography.


To display shooting settings, press [MENU/OK] in the photo shooting display and select the A ([SHOOTING SETTING]) tab.

The options available vary with the shooting mode selected.

[DRIVE SETTING]

Adjust settings for the various drive modes.

[BKT SETTING]

Choose the bracketing type and adjust bracketing options for the [BKT] drive mode.

[BKT SELECT]

The following options are available when [BKT] is selected for drive mode.

Bracketing type
O[AE BKT] V[WHITE BALANCE BKT]
W[ISO BKT] Y[DYNAMIC RANGE BKT]
X[FILM SIMULATION BKT] Z[FOCUS BKT]

[AE BKT]

The following options are available when O[AE BKT] is chosen for [BKT SELECT].

Option Description
[FRAMES/
STEP SETTING]

Choose the number of shots in the bracketing sequence and the amount exposure is varied with each shot.

  • [FRAMES]: Choose the number of shots in the bracketing sequence.
  • [STEP]: Choose the amount exposure is varied with each shot.
[1 FRAME/
CONTINUOUS]

Choose whether the shots in the bracketing sequence are taken one at a time or in a single burst.

  • [1 FRAME]: The shots in the bracketing sequence are taken one at a time.
  • [CONTINUOUS]: The shots in the bracketing sequence are taken in a single burst.
[SEQUENCE SETTING] Choose the order in which the shots are taken.

[ISO BKT]

The following options are available when W[ISO BKT] is chosen for [BKT SELECT].

Options
±1/3 ±2/3 ± 1

[FILM SIMULATION BKT]

Choose the three film simulation types used for film simulation bracketing (a[FILM SIMULATION]).

[WHITE BALANCE BKT]

The following options are available when V[WHITE BALANCE BKT] is chosen for [BKT SELECT].

Options
± 1 ± 2 ± 3

[FOCUS BKT SETTING]

Choose from [AUTO] and [MANUAL] focus bracketing modes.

  • [MANUAL]: In [MANUAL] mode, you choose the following.

    Option Description
    [FRAMES] Choose the number of shots.
    [STEP] Choose the amount focus changes with each shot.
    [INTERVAL] Choose the interval between shots.

    Focus and [FRAMES]/[STEP]

    The relation between focus and the options chosen for [FRAMES] and [STEP] is shown in the illustration.

    AStep

    BFrames

    CStarting focus position

    • Focus proceeds from the starting position toward infinity.
    • Small [STEP] values translate to small changes in focus, larger values to larger changes.
    • Regardless of the option chosen for [FRAMES], shooting ends when focus reaches infinity.
  • [AUTO]: In [AUTO] mode, the camera calculates [FRAMES] and [STEP] automatically.

    1. Navigate to A[SHOOTING SETTING] > [DRIVE SETTING] > [BKT SETTING] in the photo menus, highlight [FOCUS BKT], and press [MENU/OK].

    2. Select [AUTO] and choose an [INTERVAL].

      The view through the lens will be displayed.

    3. Focus on the nearest end of the subject and press [MENU/OK].

      The selected focus distance appears as [A] on the focus distance indicator.

      The same focus range can be chosen by focusing on the farthest end of the subject first.

    4. Focus on the farthest end of the subject and press [DISP/BACK].

      The selected focus distance ([B]) and focus range ([A] to [B]) appear on the focus distance indicator.

      Instead of pressing the [DISP/BACK] button, you can press [MENU/OK] and select [A] again.

    5. Take photographs.

      The camera will calculate values for [FRAMES] and [STEP] automatically. The number of frames will appear in the display.

[CH HIGH SPEED BURST]

Select the frame rate used when the drive dial is rotated to [CH] (continuous high speed). The display frame rate when the electronic shutter is used is 40 fps, or 60 fps in 1.29× crop mode.

Options
[20fps(1.29X CROP)] R 1 [13fps(1.29X CROP)] R 1 [10fps(1.29X CROP)] R 1
[15fps] 2 [10fps] 3

Available with electronic shutter only.

13 fps with electronic shutter.

8.9 fps with electronic shutter.

[CL LOW SPEED BURST]

Select the frame rate used when the drive dial is rotated to [CL] (continuous low speed).

Options
[7.0fps] * [5.0fps] [3.0fps]

* 6.7 fps with electronic shutter.

[HDR MODE]

Each time the shutter button is pressed, the camera takes three shots, varying exposure each time, and combines them into a single picture. The resulting photograph preserves details in highlights and shadows (aHDR).

[ADV. FILTER SETTING]

Choose the filter used when the drive dial is rotated to [ADV.] (aAdvanced Filters).

[SPORTS FINDER MODE]

Take pictures using the crop in the center of the display. Choose this option for pictures of athletes, birds, and other moving subjects.

Option Description
[ON] Pictures are taken using a 1.29× crop, reducing the picture angle by an amount equivalent to increasing lens focal length by 1.29×; the crop is shown by a frame in the display.
[OFF] The 1.29× crop is disabled.

The H[IMAGE QUALITY SETTING] > [IMAGE SIZE] item in the shooting menu is fixed at P.

The sports finder is not available in modes that offer an electronic shutter.

[PRE-SHOT]sJ

To reduce the lag between your pressing the shutter button all the way down and the resulting picture being recorded to the memory card, the camera starts shooting with the electronic shutter when the shutter button is pressed halfway and saves a series shots starting just before the shutter button is pressed the rest of the way down.

Options
[ON] [OFF]

Pre-shot photography is available only when s[ELECTRONIC SHUTTER] is selected in [CH](high speed burst) drive mode (a[SHUTTER TYPE]).

Flash photography is disabled.

[SELF-TIMER]

Choose a shutter release delay.

Option Description
R[2 SEC] The shutter is released two seconds after the shutter button is pressed. Use to reduce blur caused by the camera moving when the shutter button is pressed. The self-timer lamp blinks as the timer counts down.
S[10 SEC] The shutter is released ten seconds after the shutter button is pressed. Use for photographs in which you wish to appear yourself. The self-timer lamp blinks immediately before the picture is taken.
[OFF] Self-timer off.

If an option other than [OFF] is selected, the timer will start when the shutter button is pressed all the way down. The display shows the number of seconds remaining until the shutter is released. To stop the timer before the picture is taken, press [DISP/BACK].

Stand behind the camera when using the shutter button. Standing in front of the lens can interfere with focus and exposure.

The self-timer turns off automatically when the camera is turned off.

[SAVE SELF-TIMER SETTING]

If [ON] is selected, the setting chosen for [SELF-TIMER] will remain in effect after the camera is turned off.

Options
[ON] [OFF]

[SELF-TIMER LAMP]

If [ON] is selected, the self-timer lamp will light during self-timer photography. Select [OFF] when shooting night scenes or in other situations in which you would prefer that the lamp remain unlit.

Options
[ON] [OFF]

[PHOTOMETRY]

Choose how the camera meters exposure (a[Metering]).

[SHUTTER TYPE]

Choose the shutter type. Choose the electronic shutter to mute the shutter sound.

Option Description
t[MECHANICAL SHUTTER] Take pictures with the mechanical shutter.
s[ELECTRONIC SHUTTER] Take pictures with the electronic shutter.
t[E-FRONT CURTAIN SHUTTER] Take pictures with the electronic front curtain shutter.
u[MECHANICAL + ELECTRONIC] The camera chooses the mechanical or electronic shutter according to shooting conditions.
v[E-FRONT + MECHANICAL] The camera chooses the mechanical or electronic front curtain shutter according to shooting conditions.
w[E-FRONT + MECHANICAL + ELECTRONIC] The camera chooses the mechanical, electronic, or electronic front curtain shutter according to shooting conditions.

If s[ELECTRONIC SHUTTER], u[MECHANICAL + ELECTRONIC], or w[E-FRONT + MECHANICAL + ELECTRONIC] is selected, shutter speeds faster than 1/8000 s can be chosen by rotating the shutter speed dial to [8000] and then rotating the rear command dial.

When using the electronic shutter, note the following:

  • Distortion may be visible in shots of moving subjects.
  • Distortion may also be visible in hand-held shots taken at high shutter speeds; use of a tripod is recommended.
  • Banding and fog may occur in shots taken under fluorescent lights or other flickering or erratic illumination.
  • When taking pictures with the shutter muted (a[SHUTTER VOLUME]), respect your subjects' image rights and right to privacy.

When using the electronic front-curtain shutter, note the following:

  • Faster shutter speeds are more likely to result in uneven exposure and loss of resolution in out-of-focus areas of the frame.

The following restrictions apply when the electronic shutter is used:

  • Sensitivity is restricted to values of ISO 12800–125.
  • Long exposure noise reduction has no effect
  • The flash will not fire unless pixel-shift multi-shot is enabled.

[INTERVAL TIMER SHOOTING]

Configure the camera to take photos automatically at a preset interval.

  1. Highlight [INTERVAL TIMER SHOOTING] in the A ([SHOOTING SETTING]) tab and press [MENU/OK].

  2. Highlight [WITH IN-CAMERA TIMER] and press [MENU/OK].

    Interval-timer settings will be displayed.

    If you are using a remote release with its own timer, select [WITH EXTERNAL TIMER]. You will be returned to the shooting display, where you can start interval-timer photography using the remote release.

  3. Use the selector to choose the interval and number of shots. Press [MENU/OK] to proceed.

  4. Use the selector to choose the starting time and then press [MENU/OK]. Shooting will start automatically.

Interval timer photography cannot be used at a shutter speed of “bulb” or with multiple exposure photography. In burst mode, only one picture will be taken each time the shutter is released.

Use of a tripod is recommended.

We recommend using an AC-5VJ AC power adapter.

To view the pictures taken so far, press the a button during interval-timer photography. To return to the shooting display, press the a button again or wait until the start of the next interval.

The display turns off between shots and lights a few seconds before the next shot is taken.

The display can be activated at any time by pressing the shutter button.

The indicator lamp blinks green whenever the displays are off during interval-timer photography.

To continue shooting until the number of shots taken equals the number of exposures remaining at the time interval-timer photography started, set the number of shots to ∞.

[INTERVAL TIMER SHOOTING EXPOSURE SMOOTHING]

Select [ON] to automatically adjust exposure during interval-timer photography to prevent it changing dramatically between shots.

Options
[ON] [OFF]

Large changes in subject brightness may make exposure appear erratic. We recommend that you choose shorter values for [INTERVAL TIMER SHOOTING] > [INTERVAL] with subjects that brighten or dim dramatically during shooting.

In manual mode (mode [M]), exposure smoothing is only available if an [A] (auto) option is selected for sensitivity.

[INTERVAL PRIORITY MODE]

If [ON] is selected, the camera will adjust shutter speed during interval-timer photography to ensure that exposures are not longer than the interval between photographs.

Options
[ON] [OFF]

This option takes effect only when shutter speed is set to [A] (auto).

[FLICKER REDUCTION]

Reduce flicker in pictures and the display when shooting under fluorescent lighting and other similar light sources.

Option Description
[ALL FRAMES] Flicker reduction is applied to all frames continuous shooting frame rate reduces.
[FIRST FRAME] Flicker measurement is taken prior to the first frame only and the same reduction amount is applied to all subsequent frames that flicker may occur.
[OFF] Flicker reduction disabled.

Flicker reduction increases the time needed to record pictures.

[OFF] is selected for [FLICKER REDUCTION] when the electronic shutter is used.

Flicker reduction is not available during movie recording.

[FLICKERLESS S.S. SETTING]

Select [ON] to allow shutter speed to be fine-tuned to reduce flicker caused by LED lighting and the like.

Options
[ON] [OFF]

This option takes effect only in modes [S] and [M].

[IS MODE]

Turn image stabilization on or off.

Option Description
[CONTINUOUS] Image stabilization on.
[SHOOTING ONLY] Image stabilization enabled only when the shutter button is pressed halfway (focus mode [C]) or the shutter is released.
[OFF] Image stabilization off; x appears in the display.

The setting selected with the lens image stabilization switch, if any, takes priority over the setting chosen with [IS MODE].

Note that vibration or camera sounds may be noticeable as image stabilization takes effect.

[ISO AUTO SETTING]

Choose the base sensitivity, maximum sensitivity, and minimum shutter speed for use when ISO sensitivity is set to [A] (auto). Settings for [AUTO1], [AUTO2], and [AUTO3] can be stored separately (a[AUTO]).

[DIGITAL TELE-CONV.]

Zoom in on your subject during shooting using ultra-high-resolution digital zoom.

Option Description
[2.0x] Take pictures using 2× zoom. O- and P-size pictures are automatically cropped to size Q.
[1.4x] Take pictures using 1.4× zoom. O-size pictures are automatically cropped to size P.
[OFF] Digital teleconverter off.

Image quality may drop when the digital teleconverter is used.

The digital teleconverter cannot be used when a 1.29× crop is selected during burst photography or when [ON] is selected for [SPORTS FINDER MODE].

[MULTI EXPOSURE]

Choose how the camera combines shots to create a “multiple exposure”.

Option Description
[ON]

Adjust multiple exposure settings and record multiple exposures.

  • [ADDITIVE]: The camera adds the exposures together. You may need to lower exposure compensation depending on the number of shots.
  • [AVERAGE]: The camera automatically optimizes exposure for the final picture. The background in series shot without changing the composition will be optimally exposed.
  • [BRIGHT]: The camera compares the exposures and chooses only the brightest pixel at each location. Colors may be mixed depending on their brightness and hue.
  • [DARK]: The camera compares the exposures and chooses only the darkest pixel at each location. Colors may be mixed depending on their brightness and hue.
[OFF] Multiple exposure mode disabled.

The camera can combine up to nine exposures.

[PIXEL SHIFT MULTI SHOT]

The camera takes a series of 20 shots, using in-body image stabilization to move the image sensor by half a pixel with each shot and recording each frame in RAW format. Using specialized computer software, the frames can then be combined to create a high-resolution RAW picture.

  1. Navigate to A[SHOOTING SETTING] in the photo menus, highlight [PIXEL SHIFT MULTI SHOT], and press [MENU/OK].

  2. Choose a value for [INTERVAL].

    • We recommend setting [INTERVAL] to [SHORTEST].
    • If you intend to use the flash with every shot, choose a value for [INTERVAL] long enough to allow the flash to charge between shots.
  3. Press the shutter button to start shooting.

    • The shots are recorded to the memory card in RAW format.
    • To minimize vibration, use the self-timer or a remote release.
  4. Combine the shots on a computer.

    • The shots can be combined using FUJIFILM Pixel Shift Combiner.
    • To save high-resolution RAW pictures in other formats, use Capture One Express for Fujifilm, Capture One for Fujifilm, or Capture One Pro, available from Capture One A/S. FUJIFILM X RAW STUDIO and RAW FILE CONVERTER EX powered by SILKYPIX cannot be used for this purpose.

Visit the websites below to learn more about or download the following computer software:

a FUJIFILM Pixel Shift Combiner

a Capture One Express for Fujifilm

a Capture One for Fujifilm

a Capture One Pro

Pixel-shift multi-shot photography can be performed via tethered shooting. For this purpose, use FUJIFILM Pixel Shift Combiner.

The flash will synchronize with the shutter at shutter speeds of 1/25 s or slower.

The following limitations apply to the use of the pixel-shift multi-shot option:

  • Pixel-shift multi-shot photography can only be performed using the electronic shutter.
  • Sensitivity is restricted to a maximum of ISO 1600. Choosing higher values or a setting of [AUTO] results in a sensitivity of ISO 1600, while lower values remain unchanged.
  • The only option available for [RAW RECORDING] is [LOSSLESS COMPRESSED].
  • Pictures taken with [C] (AF-C) selected for focus mode will be shot in focus mode [S] (AF-S). Pictures taken with [S] (AF-S) or [M] (manual) selected are shot in the chosen focus mode.
  • If the subject or camera moves during shooting, the desired results may not be achieved when the shots are combined.
  • A[SHOOTING SETTING] > [FLICKER REDUCTION] is automatically set to [OFF].
  • The value selected for exposure compensation applies to all 20 shots.

Playback

Pictures taken using the pixel-shift multi-shot option are indicated by a pixel-shift multi-shot icon in full-frame playback (aThe Playback Display).

xF[WIRELESS COMMUNICATION]

Connect to smartphones running the latest version of apps. The smartphone can then be used to:

  • Control the camera and take pictures remotely
  • Receive pictures uploaded from the camera
  • Browse the pictures on the camera and download selected pictures
  • Upload location data to the camera

For additional information on troubleshooting wireless connections, visit:

aUsing Your Camera with Smartphones, Tablets, and Computers