• Network/USB Features and Settings
• Network/USB Setting Menus

Enter a search term and click .

Adjust camera network and USB settings.

---

---

[Bluetooth/SMARTPHONE SETTING]

Adjust Bluetooth-related settings as well as a variety of smartphone-related settings.

[PAIRING REGISTRATION]

Pair the camera with a smartphone or tablet to which the smartphone app has been installed.

[SELECT PAIRING DESTINATION]

Choose a connection from a list of devices with which the camera has been paired using [PAIRING REGISTRATION]. Select [NO CONNECTION] to exit without connecting.

[DELETE PAIRING REG.]

Delete existing pairing information for a smartphone or tablet.

[Bluetooth DEVICE LIST]

List the devices with which the camera is paired (other than the smartphone) or end pairing with selected devices.

[Bluetooth ON/OFF]

If [ON] is selected, the camera will automatically connect with paired smartphones or tablets running the smartphone app.

Options
[ON]	[OFF]

[AUTO IMAGE TRANSFER ORDER]

Select [ON] to upload pictures automatically as they are taken.

Options
[ON]	[OFF]

[SMARTPHONE LOCATION SYNC.]

Select [ON] to enable ongoing download of location data from paired smartphones or tablets.

Options
[ON]	[OFF]

[NAME]

Choose a name ([NAME]) to identify the camera on the wireless network (the camera is assigned a unique name by default).

[IMAGE TRANSFER WHILE POWER OFF]

If [ON] is selected, the camera will continue to upload pictures to paired smartphones or tablets even while off.

Options
[ON]	[OFF]

[RESIZE IMAGE FOR SMARTPHONE]

Select [ON] (recommended) to enable compression, reducing file size for upload.

Options
[ON]	[OFF]

[WIRELESS COM. FREQUENCY SETTING]

Choose the band for wireless LAN connections.

Options
[2.4GHz (IEEE802.11 b/g/n)]	[5GHz (IEEE802.11 a/n/ac)]

[SELECT FILE TYPE]

Choose the format or formats used for upload. Pictures can be uploaded in [JPEG] format and/or [HEIF].

[AIRPLANE MODE]

Select [ON] to disable the camera’s wireless LAN and Bluetooth features.

Options
[ON]	[OFF]

[NETWORK SETTING]

Adjust settings for connection to wireless networks.

[ACCESS POINT SETTING]

Option	Description
[SIMPLE SETUP]	Connect to an access point using simple settings.
[MANUAL SETUP]	Manually adjust settings for connection to a wireless network. Choose the network from a list ([SELECT FROM NETWORK LIST]) or enter the name manually ([ENTER SSID]).

[IP ADDRESS SETTING]

Option	Description
[AUTO]	The IP address is assigned automatically.
[MANUAL]	Assign an IP address manually. Manually choose the IP address ([IP ADDRESS]), subnet mask ([SUBNET MASK]), and gateway address ([GATEWAY ADDRESS]).

[instax PRINTER CONNECTION SETTING]

Adjust settings for connection to optional Fujifilm instax SHARE printers (aEstablishing a Connection).

[CONNECTION MODE]

Adjust settings for connection to external devices.

Option	Description
[USB CARD READER]	Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to the computer. The camera functions normally when not connected.
[USB WEBCAM]	Connect the camera to a computer via USB for use as a webcam.
[USB TETHER SHOOTING AUTO]	The camera can be controlled from computers, gimbals, drones, or other devices connected via USB. The camera automatically enters “tethered shooting” (i.e., remote-control) mode when the external device is turned on and returns to normal operation when the external device turned off or disconnected. Photographs can be taken remotely and automatically downloaded to computers running Capture One, Adobe® Photoshop® Lightroom® + Tether Plugin, FUJIFILM X Acquire, or FUJIFILM Pixel Shift Combiner. FUJIFILM X Acquire can also be used to save and load camera settings. Remote photography and movie recording are available when the camera is connected to a compatible device such as a gimbal or drone. Use camera controls to switch between still photography and movie recording. The features available vary with the device connected.
[USB TETHER SHOOTING FIXED]	As for [USB TETHER SHOOTING AUTO], except that the camera remains in “tethered shooting” (remote-control) mode when the external device is off or not connected, allowing the device to resume control when the connection is re-established after an accidental disconnection or other disruption. At default settings, pictures are not recorded to the memory card.
[WIRELESS TETHER SHOOTING FIXED]	Choose this option for wireless remote photography. Select an access point using [NETWORK SETTING] in the network/USB setting menu.
[USB RAW CONV./ BACKUP RESTORE]	Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected. [USB RAW CONV.] (requires FUJIFILM X RAW STUDIO): Use the camera’s image processing engine to rapidly convert RAW files to other formats while maintaining image quality. [BACKUP RESTORE] (requires FUJIFILM X Acquire): Save and load camera settings. Reconfigure the camera in an instant or share settings with other cameras of the same type.

[USB POWER SUPPLY/COMM SETTING]

Choose whether USB connections to computers, smartphones, or other devices are used for power delivery or data transfer.

Option	Description
[AUTO]	The camera switches between power delivery and data transfer automatically.
[POWER SUPPLY ON/COMM OFF]	The camera draws power from the connected device, reducing the drain on the battery. Data transfer is disabled.
[POWER SUPPLY OFF/COMM ON]	The camera can exchange data with, but not draw power from, the connected device.

[INFORMATION]

View the camera’s MAC, Bluetooth, and wireless network IP addresses.

[RESET WIRELESS SETTING]

Restore wireless settings to their default values.