Enter a search term and click .

Adjust image quality settings for movies.


To display image quality settings, press MENU/OK in the movie shooting display and select the H (IMAGE QUALITY SETTING) tab.

The options available vary with the shooting mode selected.

FFILM SIMULATION

Options are the same as those for still photography, but settings must be adjusted separately (aFILM SIMULATION (Still Photography)).

FMONOCHROMATIC COLOR

Options are the same as those for still photography, but settings must be adjusted separately (aMONOCHROMATIC COLOR (Still Photography)).

FWHITE BALANCE

Options are the same as those for still photography, but settings must be adjusted separately (aWHITE BALANCE (Still Photography)).

FDYNAMIC RANGE

Choose a dynamic range for movie recording.

Option Description
V100% See “DYNAMIC RANGE”.
W200%
X400%

AUTO (automatic dynamic range control) is not available during movie recording.

W200% is available at sensitivities of from ISO 320 to ISO 12800, X400% at sensitivities of from ISO 640 to 12800.

This item is available when t is selected for BMOVIE SETTING > F-Log/HLG RECORDING.

FTONE CURVE

Options are the same as those for still photography, but settings must be adjusted separately (aTONE CURVE (Still Photography)).

FCOLOR

Options are the same as those for still photography, but settings must be adjusted separately (aCOLOR (Still Photography)).

FSHARPNESS

Options are the same as those for still photography, but settings must be adjusted separately (aSHARPNESS (Still Photography)).

FHIGH ISO NR

Options are the same as those for still photography, but settings must be adjusted separately (aHIGH ISO NR (Still Photography)).

INTERFRAME NR

Select AUTO to automatically adjust interframe noise reduction according to shooting conditions.

Options
AUTO OFF

“Ghosting” may occur with moving subjects or if the camera is moved during shooting.

FPERIPHERAL LIGHT CORRECTION

Select ON to enable peripheral illumination correction during movie recording.

Options
ON OFF

If ON is selected when a lens that does not transmit data to the camera is attached, peripheral illumination will be adjusted according to the option selected for HIMAGE QUALITY SETTING > xFMOUNT ADAPTOR SETTING > PERIPHERAL ILLUMINATION CORRECTION in the shooting menu (aPERIPHERAL ILLUMINATION CORRECTION).

Select OFF if you notice banding in movies recorded using this option.

xFMOUNT ADAPTOR SETTING

This item is also found in the photo menus (axFMOUNT ADAPTOR SETTING (Still Photography)). Changes to one apply to the other.